Search results

Thanks for all the suggestions. I sawed it off and will get a new armature. The shaft was crooked as a dogs hind leg.

The starter armature shaft is bent and cracked so I need to replace it. I have the modern type starter gear on it but I am unable to get it off.. The screw is out and lots of WD 40 applied. Any suggestions are appreciated.

A while back I asked for help because the car would not start, and when I had the lights on and pushed on the brake the lights almost went out. Thanks for all the helpful suggestions. I changed starters, switches, rocked the car while in high gear and re-charged the battery. Nothing changed...

Car won't start. Battery charged. Test light shows current every where it should be. Turn lights on and press on the starter and lights almost go out. Have tried different starter and starter switch and checked cable from battery to starter and it is OK. What do I try next? Thank you very...

My brand new battery was dead this morning. The alternator checks out O.K. I assume something is drawing the juice out of the battery. How do I check this out? Many thanks for any help.

I need to replace one piston in my Model "A" Can I use one split piston with the three non split pistons? Thanks for your help.

Might sell separately.

May or may not be clear.

What is an acceptable range for cylinder psi with a stock Model "A"? Thank you for your help.