Search results

I am curious if anyone has seen a Model A water pump failure where the housing has snapped by the bottom 2 bolts. Damage has caused a fan blade to detach and the pump smashing into the radiator. Not my car, but I have not heard of this before Any comments would be appreciated Many thanks in...

Looking for a good 1958 Ford Custom RHS tail light bezel, The Chrome metal piece that the tail light lens mounts to. PM me with a few images if you have one available I am in Australia but my son lives in Idaho Thanks in advance Graham Bilsborow Adelaide Australia

Looking for 5 off 1934 car dash knobs. Not fussed what wording is on them. Let me know what you have available many thanks Graham

Looking for a nice pair of original 1933 car hood handles pm me with photos and cost cheers

chasing a couple of small things to complete my build 1. a 33 or 34 Fuel gage, need a nice one ( Obtained ) 2, a pair of original 33 hood handles, ok to have a couple of small marks but would prefer them to be nice with nice nickle coating pm me with pictures and cost thanks in advance

Looking for a good 33-34 closed car interior header panel, interior panel above the windscreen.

Can anyone shed light on this speedo Is it a 39 Truck ??????

Can anyone advise the best way to adjust the doors on a Model 40, My doors line up pretty good but feel the doors should move back about 1/8 to 1/4 of an inch, the doors open and close nicely but the gap at the front of the doors appears too close, almost touching the A pillar. Do I space the...

Where is the best place to but quality gear box parts for a 34 car, bearings, gears etc. thanks in advance

Looking for a partner to this manifold, I have the LHS looking for a matching RHS

Converting a 52 Ford Customline from 6V Positive ground to 12V Negative ground. Car was overdrive, anyone converted the overdrive circuit from 6V Pos to 12V neg. Any help would be appreciated.

Been awhile but have finally made some progress on my 33 5W Deluxe B Model. Car has matching engine and Chassis. Decided to hop up the B, Yapp Riley 2 Port overhead valve conversion with twin 94 Holley carbs, drilled crank for full oil and inserted bearings, new rods and 80 over 283 Chev...

Is there a press fit hardened sleeve and undersized wheel bearing for the 32 to 48 rear differential. OD of Housing bearing surface is 2.06". I know I can get a sleeve that needs machining of the old bearing surface and uses a standard wheel/hub bearing. Hoping to avoid this. Cheers

Looking for a good F1 Right Hand drive steering box and column please PM me.

Does anyone have a BB fourspeed Bellhousing for sale

Help, I purchased an AA Bellhousing a while ago, went to bolt it to my 1933 B Engine and the bolt pattern is different. Is the AA Bellhousing different to BB and 33/34 photos and or images would be great. Banger novice

I am going to be in the San Francisco area from the 10th to 15th of March. what Early Ford V8 stuff is worth going to see. thanks in advance

Hi guys, I am after a pair of chrome knobs off of an under dash air conditioner, from the John E Mitchell factory Texas. Monitor, Frigiking and Selectair. http://www.jalopyjournal.com/forum/showthread.php?p=7523516#post7523516 added images on the HAMB if you have and old unit that is...

Looking for a good radio delete plate for a 38 Deluxe. thanks

Wanted AA bellhousing, I want to adapt a late model 5 speed. prefer Australia or New Zealand. cheers