Search results

Exoilfld is now a scammer using wlcox65@yahoo.com as his email. He contacted me regarding parts from an old ad and seemed suspicious as he wanted my email without asking questions regarding the parts. I messaged that if he was interested to give me his phone number and I would call. The area...

37-38 Phaeton and Convertible Sedan Trunk Hinges. Each hinge has one mounting missing (see photos). Hinge pins are also missing. These obviously need plating but are super rare!! $150 shipped to lower 48 states. Steve 863-651-3276

SOLD!! 1935-39 convertible coupe and convertible sedan front window regulator, passenger side. Bench tested and works smoothly. $200 shipped to lower 48.

SOLD 1935-39 convertible coupe (and front convertible sedan) driver side window regulator. Bench tested—operates smoothly. $200 shipped in lower 48.

...SOLD 1935-39 convertible coupe (and front convertible sedan) passenger side window regulator. Bench tested—operates smoothly. The intermediate gear which often wears out and fails on these regulators has been replaced with a NOS gear (see second to last photo). $200 shipped in lower 48.

Pending sale!

Have any 1939 owners added a radiator overflow tank? My 38 CS has ‘39 horns mounted on driver side inner fender (out of necessity), not leaving much room. Would be curious to see how it’s been done… As always, thank you in advance! Steve

Can anyone shed light on how the clock light wire passes through the glovebox for 1938? As always, thank you in advance! Steve

I have a 1938 Ford Radio. Previous owner had radio professionally repaired in 2012, and installed in car. Car had no wiring at all until I purchased in 2022. I installed factory correct wiring through out the car in June 2022. When I turned radio on, it hummed, so I left it alone and moved on...

There are two brass connectors on the back of 1939 Deluxe Gauge clusters. I need the longer of the two, I believe it connects the Oil and Amp gauges. Thank you! ~Steve

Door jamb bumper mystery… My 1938 Convertible Sedan has these factory installed door jamb clips, which appear to be for certain Model A cars (see photo). It’s just one of many quirks of this car!! What is the correct rubber door jamb for these clips? As always, thank you in advance! Steve

The 4 front door jamb bumper recesses( 2 per side)on my 38 CS have brackets mounted with an off center fine threaded screw (see photo). The typical center hole rubber bumper (which is supposed to be correct) does not fit nor does the other supposedly correct rubber bumper offered by vendors (...

1938 interior question…. My 38 CS is missing interior trim (windlace?) beginning at the floor, running along the edge of right and front left kick panels and up along outside edges of dash. In most photos, the trim terminates about halfway up windshield garnish molding, tucked behind the...

Where are the two rubber “Quarter to Top Bow Pads” located on 38-39 convertible sedans? (Part number 78-744859) I don’t see any pads like this (see photo) currently on my car… As always, thank you in advance! Steve

The headlight switch is not centered when in the off position. (See photo). The lights work correctly when switch moved to both parking and headlight positions. The spider at end of shaft is installed correctly with the retaining clip. The headlight wiring switch is fully seated at bottom of...

I’ve been perplexed by this assembly…. My light switch and bail retainer on my 38 was (of course) disassembled when I purchased the car. I have the two piece switch assembled correctly and fully installed on end of steering column, fully seated. Lights work correctly. The retaining bail...

The oil filler screw on the fan pulley was over tightened at some point and now it won’t budge on my 8BA. I haven’t been able to remove it since purchasing the car. Is there an extractor that works on flat-head screws? If not… what is the procedure for removing the fan pulley assembly from...

My 38 CS has a 4.11 rear end (stamped 9 37). I believe it should have a 21 tooth speedometer gear in the turtle. Speedometer reads significantly below actual MPH. I believe correct turtle should be stamped 3 37. Mine is stamped 24 (see photo). Is the current 24 turtle mean it has a 24 tooth...

Anyone have any luck converting a 1937 Glove Box liner (which appears to still be available) to fit a 1938 open car? It appears 1938 liners are no longer available… As always, thank you in advance! Steve

Anyone have any luck converting 1939-up cowl vent screen to fit a 1938?? The 1938 screens seem to be unobtainable from major vendors right now… As always, thank you in advance! Steve