Search results

Hi Folks: Looking for a good pair of original Rear Fenders for a 31 Cabriolet were working on. John Poole Tinbasher@rogers.com

Can anyone recommend a good book or Web-site that shows the correct hardware and the installation orientation of the hardware on a 31 Roadster. For the Side Curtains. JP

Does any one know of a good article or diagram of the Pop Out Ignition. I need to repair mine as it had a intermittent short in the key. Thanks JP

I'm looking for a pair of Early 31 Cabriolet step plates. Not for a Slant Windshield model. JP

Does anyone know of a supplier or someone that is making steplates (or Sill Plates) or a early 1931 Cabriolet? 68B. Thanks Tinbasher

Are there any other Model's of A that uses the same windshield hinge as a 31 Straight Pillar Cabriolet? (68-B) I have a hinge but it's pretty rough. The Old Tinbasher

Does anyone have a correct chassis black for the Model A. At one time you could buy premixed Chassis black. Now there's all kinds of names for Satin Black at all different levels of gloss, but what one is correct. Heck at one time "Rad Shops" bought by the 5 gallon drum. JP

I have been working with another Canadian member for the last 7 years trying to find samples of the 12 Canadian Colours. So far we found the following. Evergreen Richelieu Blue (One example and Ford Service bulletin) Mount Vernon Green ( 3 samples) Henna Red Cameo Cream ( A pinstripe colour)...

A few of us got together from our Model A Club to test jets on a flow tool one of the members had. Every jet we tried was 1/2 of the flow it should be. Does anyone have a good article on making, setting up and using the "Jet Flow Tool" Thanks Tinbasher

Hi Guys: I'm working on an original 32 frame and the rear rail where cut off. I was able to get two rear sections but there about 8" short. What I need is a pattern or pictures of the top and bottom surface of the rail so I can get the correct shape where the gas tank fits in. I can find...

I'm looking for an original Drag Link If anyone has one. JP

Is the drag link the same for a 1931 Ford Model A and a 1932 Ford V8?

Looking for a restorable original Rt. 1/4 panel for a roadster. What have you got? Jp

Hi Guys: I'm using the 32 Axle and spindles. what is a good Kingpin kit to use when using the Hydralic brake backing plate. The later style with the flat top is the look I like but the locking pin is suppose to be in the wrong location. Is it better to use the 32 kit and cut off the cup on the...

Looking for parts for a early 32 Roadster Lt. and Rt. Doors originals 25 Louver Hood or just the hood top panels 39 Sycro Transmission Thanks John P. The Old Tinbasher

Does anyone know of a good company to purchase 32 Cowl patch panels from. I want to stay away from Howell's and Mac's. Thanks JP

Looking for the two front frame rails for a 32 car frame. I need 36" from the front of the frame horn.

Hi Guys: I'm looking for the front frame section for a 32 passenger car. I need 30" of the front section. The 32 I'm working on has been damaged in the front and it beyond repairing for the time it will take to fix it. Maybe someones got a damaged frame in the rear that has a good front section.

If someone has a 32 Roadster, could you take pictures of the Front and rear jams of the door opening. This would be a big help to our project. JP

Does anyone know of someone that makes the A and B pillars for a 32 Roadster.