Search results

I got my fathers pickup from my little brother and the front clip was already removed and frame has been painted. I am in the process of mounting the sheet metal for body work. Which set of holes do you put the mount on? The ones closest to the engine mounts. Any help would be appreciated.

Engine rebuilt 3 years ago with less than 1000 miles on it. New Carb, new radiator, new leak-less water pump, new seats springs and covers, new 2 blade aluminum fan, rebuilt distributor, new motor mount rubber, trans gaskets, clutch, 6v positive ground alternator and new wiring. One piece top...

I have placed a new aluminum fan blade on. I have tightened the nut and placed the cotter key in. I ran the engine on a 10 mile test drive. I had to tightened the nut again. I was wondering if I should put a washer behind the nut to put it at the correct alignment for the cotter pin. I would...

1929 Model A pickup. I have Texas Title in my name. Tons of new parts. Radiator, new shell, wiring, new headlight/horn conduits, 6v alt. conversion, head lights, door latches, fuel gauge, frame to body wood, interior wood, bed to frame wood, tail light assembly, Firestone tires/tubes. hub caps...

Runs and Drives V8 4spd. New cloth 6v pos wiring, Door seals, rear bumber, tail lights, park light, Reds dual exhaust with smithy mufflers, rebuilt carb, new brushes in gen. Can send Pics thru phone. or email. chudm71@yahoo.com Thanks for looking.

I have a 29 ccp that I just swapped the engine and trans in. It wasn't running before the swap. I put the trans into first and second and it growls until I get it into 3rd. Any ideas would be greatly appreciated. Thanks Chad M.

My 1950 F1 is getting a new harness original cloth style, and I am at the point of replacing the headlight wires. I have the crossover wire but the old harness was butchered and I am sure there is a junction box I am missing. I have seen the one's at Mac's and Dennis Carpenter. I was wondering...

I have done a search on AA tires 30x5 and 600x20 but very little post. I was wondering if you Double A guys have used Macs tires model: AA20BR Model A Ford Truck Tire - 600 X 20 ( 30" X 5" ) - Blackwall - US Royal - AA Truck Any help would greatly be appreciated. Thanks Chad M.

I just pulled an 8BA out of a my 47 pickup. It was locked up. I got the heads off, intake, pan, and all but 3 of my pistons. There was only about a cup of water in the oil not mixed and the cylinders have what looks to be like water damage. I have cleaned the surface and have only discovered...

Well I started out with an A Coupe that had been cut up for a wheat truck and been scrounging parts to make it into a Depression pickup. I just couldn't wait to see what it would look like so got it tuned and slapped it together.. Let me know what you think... Maybe I will use the headlights off...

Pulled out of the barn and got it home.. :D I can't wait to work on it.

Sitting for 61 years. The motor is a combine motor turns. Trans gota be a AA. I hope. Door bottoms are still solid. Tank looks very clean. Original starter was in the cab. Radiator has a little fan chew on it. Headlight buckets are stamped Ford. Frame is a cheverolet. I must love Model A's. :D

Well, I have a chance to buy this.. I would like any input on the pics that are with it. The fenders are T???? The engine an A or B out of a Combine, it turns free?? I think the body is a 30 Coupe. You can't see it in the pics, but the wheels are solid steel not from an AA or TT. Let me know...

Need a Half ton front fender. Thanks. Chad M.

I need some ideas.. I am in the process of rebuilding my front end. New springs, shackle bolts, king pins, and tie rod ends. The problem is the drag link, I have looked @ Mac's, Early Ford, Obsolete Ford, and have done numberous searches on the Barn for a new one, No luck. The machined end ball...

Hello I have a 1929 Coupe all original except wheels. Runs very well, needs brakes done. Also have partially restored chassis with engine and trans with brakes done. Alot of extra old and new parts. Willing to trade for a 30-31 pickup.. I just as good shape.. will post pics soon 6500.00 or obo.

Hello, New to the Barn, Glad to see a Site dedicated to Fords. The question I have is who sells headers that will clear the stock steering in a 50 F-1. I have check out the LMC headers. Wondering if there were any problems with using them or Does anyone know anyplace else.. Thanks C. M.