Search results

1932 Roadster V8. Car was put together in the early/mid 90’s using a Brookville body and all aftermarket sheet metal. Has original firewall, and gas tank. Original 32’ frame, 32’ front and rear axle, 36’ “LB” 21 stud Flathead, 32-34 trans, mechanical brakes. Car has 25 louver hood and has...

Decided to sell my 32' Roadster project. Project details as follows: Body is original but needs all patches installed. All new Brookville subrails, United Pacific cross braces, floor, and tool tray installed. Cowl is decent and needs lower patches and work on inner A pillar, 1/4's will need all...

Original wood subrails removed from a 1931 model A Victoria. Overall in decent shape. Was cut at front of subrails where they go into lower cowl. $150.00 prefer not to ship. Can't get pictures to load, I can text or email them. Thanks, Jim 865-805-9381

Original 32' V8 headlight bar. Came off an older restored car. Not sure if the emblem is original. Someone chromed the ends at some time. Would look good on an unrestored car. Pm or call Jim 865-805-9381 $125 plus shipping

1932 ford original B model radiator. Looks like a nice radiator but I have never ran it or checked it for leaks. $200.00 plus shipping. I have a walker radiator box I can ship it in. Pm or call Jim if interested. 865-805-9381

Brookville 32' Roadster Body SOLD New Brookville 32' roadster body. Has cowl vent, external hinges, external trunk handle, hot rod floor, and Deck Former. Retail on this body is $12,200.00 with options. $10,000 I also have Tack strip kit, Seat riser, wood, and package tray to make body stock...

1930 Model A pickup project. Very solid pickup cab with really nice original doors. Original Bed that's in good shape. The front bed header has rust but includes a good usable original. Every piece of wood new for the cab and bed is included. Cab is bolted down to a straight original frame and...

I have new repro 1930-31 model pickup running boards $200 pair (brattons $260.00) 1930 model A splash shields $150 pair (brattons $175.00 a pair) 1930-31 running board braces front and rear $80.00 for all 4 (brattons $28.00 each 1930-31 front fender braces $60.00 for the pair. (Brattons 37.50...

I have front brakes I took off of a 33-34 front end. One backing plate is junk and the other one is useable but had tabs welded to it. I also have a pair of Rocky Mountain drums and one of them has a nice backing plate stuck in it. 32-34 brake actuator rods are also there and nice and free. I am...

I have a set of clutch and brake pedals for a model A. Not sure how to tell years but the brake pedal has a grease fitting hole and the clutch does not. They were cleaned and painted when I got them. The Brake pedal is really nice on the pad but the clutch is worn on pad. Holes look pretty good...

Original 32-34 Spindles I took off of an axle recently. Drivers side spindle looks like someone cut the backing plate bolts off with a torch. Passenger side is really nice. I glass beaded the spindles and the bearing surface is really nice. King pins included and are in decent shape. $100.00...

32' ford frame section. Cut right in front of rear crossmember. Has some pitting but would sandblast and high build prime. Crossmember is not broken or cracked. This is the early style without the frame reinforcements. $400.00 plus shipping, would prefer local pickup. Also have 32' rear spring...

Super nice 33-34 rear crossmember. $150 plus shipping. Pm or call Jim 865-805-9381. I can email more photos.

Original 33-34 ford rear crossmember. Some pitting but not cracked. Would blast and clean up good as is or high build prime. Has one place cut on passenger side rear flange. $80.00 plus shipping. Pm or call Jim 865-805-9381. Also have original spring out of this crossmember available. I can...

Original 32' fuel tank sending unit. been in a box on a shelf since 2002. don't know much about it so please feel free to ask questions. $125 shipped in the lower 48 state. PayPal or Money Order PM or Call Jim 865-805-9381 SOLD, THANK YOU

In need of v8 60 Water pump rebuild kits for the taper seat type. PM or Call Jim 865-805-9381

IN need of .020 Rod Bearings for a 37'-39' V8-60. Please PM or Call Jim 865-805-9381

My 8BA starting using water and getting hot last week. I have been running this engine about a year and it has always run cool. This past weekend I took the car out on about 160 mile trip and it was very hot and humid. Car ran up around 180 for awhile and then slowly kept creeping up to about...

Any advise on how to seal up (if any way) a Tin Sided V860 where the tin sides are welded to the block? have an older rebuilt engine but I don't know any other history as it was rebuilt before I bought it. Filled the engine with water and it is sweating out the tin sides pretty bad when not...

This is the back of a 1932 Model B oil pan I cut off to put the engine in an A. Thought someone might need this to repair another pan. $25.00 plus shipping PM if interested SOLD, Thank you