Search results

Reject 2GC for stock 255 cu in flathead

Slop in steering wheel turn

I want to put pcv on 50 merc 255

Are t\he fittings double flare or ferrule in fuel pump?

I am looking for a source for Rochester 2GC carbs

Run the stock 885 with Chevy distributor

550 merc 4 bolt carb with bubba distributor

I have had some wandering going on with my Merc, and finally got time to get under and see what was up. It appears the previous owner/owners altered the original idler arm design, by adding roller bearings to each end, and all I had to do was tighten the adjustments up on the bearings, to take...

Want to buy an original 1950 Mercury Monterey steering wheel complete or the horn ring from same wheel.

If anyone needs a tank for a 1950 mercury, I would not advise Tanks, Inc. I bought one for my car, and the third day, I made it fit. It bolts right in, if you drill new holes in the frame, and alter the filler pipe, and redrill the sender hole to accept the old sender, cause the new sender...

I have a stock 1950 Mercury Monterey, and it has a lot of steering slop. The idler arm needs replacement for sure, and I have a steering box with 33000 miles on it, and is tighter than the original. I would like to know if anyone has used the upgrade steering that is available. Is it worth...

I need a monterey script for the door of my monterey. just found out the former owner glued it on, the little posts are broken. But, before I try to drill and install new posts, I will try to find another.

Where does one start to look for cracks in block

I have a stock 50 merc and am looking for a different carb that will work with the Loadamatic distributor. Any suggestions would be appreciated.

Has anyone ever taken the radio out of the dash on a mid-century merc?? or does anyone know of a firm that converts the "face" of the radio to a modern radio?? Having owned the 50 Merc Monterey (2000 made in 50) since 1989, with everything working, even the clock, my radio has quit so it must be...