Search results

I have to replace the insulation in my '40 Lincoln Cabriolet, do any of you have a recommended supplier? What do you guys recommend for floor insulation under the carpet? I sure see a lot of sound and heat product out there and wonder what is the best from your experience. Ron

I need the three mounting brackets for a 1953, 317 cubic inch Lincoln/Ford Y Block, I cannot find any on ebay, Mark II does not have them, where else should I look. Thanks, as you guys know the later Y Block brackets will not work. Ron

I need the three mounting brackets for a 1953 317 cubic inch Lincoln/Ford Y Block, I cannot find any on ebay, Mark II does not have them, where else should I look. Thanks, as you guys know the later Y Block brackets will not work. Ron

Hey, it is a Ford product and has a flat head in it or at least it will. My car is undergoing body and paint work to restore it to the original Capri Blue color that she departed the factory with so many years ago. It was delivered with the standard interior, not gold trim, and the dash appears...

I have to replace the seal on my '40 Lincoln U-Joint housing cap and am interested in where I could purchase the tubing that the guys were talking about in 2010 and purchased from Hot Rod John. If any of you have an update in your experience with the tubing or can offer advice on the best way...

I use LED replacements on my early 12v cars for safety because they are so much brighter. I did a search on this forum for lights to replace the 6 volt taillights in my '40 Lincoln but got no hits. Does anybody know if they are making them for our early cars?

Does anybody know if it is still available for sale or rent? I checked ebay and the web but could not locate one.

I am reinstalling the Columbia/rear axle assembly in my '40 Lincoln and realized that the shackle studs and bars need to be replaced. They were loose when I extracted them, on installation how do I orient the stud so that it will mate up with the bar on both the spring and the axle? Also, any...

I need to find an expert to rebuild my '40 Lincoln transmission which pops out of second gear every time that I back off of the throttle. Have any of you had a good experience with somebody in Southern Arizona that you would recommend?

I just read Gringo's Nov 12 thread about removing his '40 Ford rear axle and have a couple of questions. The reason that I am removing it is to take the entire rear axle to have John Connelly inspect, and rebuild as necessary, the Columbia two speed assembly. Is it possible to disconnect the...