Search results

How do I install a pin into the door handle.

how to add oil to the rear end of a 1948 ford Columbia Rear End, also there is one nut located at the very bottom of the Columbia which is attached to the main gear box leaking very little. Can I remove that nut and add gasket sealer to it or can I add a "o" ring to the nut. which is better ?

I when to change my ignition switch and noticed on the back of the original one I removed had 3 pins. 1) Marked Coil, 1) Marked GA, 1) Marked AM The new switch has Bat. Coil, and GA marked in the back. So, what does AM Stand for?

I have a 1948 Ford, new battery, new starter, new solenoid, new ignition switch, new starter button, full tank of gas. Car starter easy was running for about 10 minutes and just stopped running. My guess is I lost juice from some were, but don't know how to begin checking where I lose it.

If I touch the neg. battery post on a 1948 ford with a wire clip at one end and a light at the order end to the solenoid and the light goes on, does this mean power is going to the solenoid. If so , can a touch the solenoid with the wire clip and the touch the coil will the light go on?

Have power from battery to solenoid, to coil, to reg., and relay horn switch, ignition switch. Have no contact from starter button, no lights nothing. checked ground from battery cable to block and from firewall to block. looking for some answers and help.

Looking for the easy way to change the circuit breaker on a 1948 ford. The circuit breaker is behind the dash just above the gauges for the fuel , oil, amps and coolant. Also I have the original 51A-12258 which shows four contacts A,B,B H I know B is for battery what is A and H for.

Does anyone know the best way to put the Columbia Canister on so that the arm from the Columbiarear end is attached to the canister rod because its hard to view it and know that its in the slot.

Does anyone know the length of the speedometer cable going from the Columbia speedometer adapter under the hood to the speedometer under the dash

Looking for 1946/1948 Ford Columbia Flathead Vacuum Cylinder Base ***..

Looking for a 1946/1948 Ford Columbia Flathead Vacuum Cylinder Base ***...

1946/1948 Ford Columbia Flathead Vacuum Cylinder Base ***...

Looking for a 1946/1948 Ford Columbia Flathead Vacuum Cylinder Base ***...

Wanted 4801 Timing Fixture

Looking for set-up mechanism which sets the duel points in the distributor

Looking for duel exhaust from the manifold to the back bumper both sides

Does anyone know were I can buy Daul Exhaust pipes for a 1948 Ford Coupe

1948 Ford Super Deluxe Sedan Coupe A Dearborn Award car. This car and frame was Dry Strips by American Dry Stripping , Milford Ct in Nov. 2005. Body work and paint was by Neils Auto body in Watertown Connecticut. Interior is from Lebaron Bonney and install by Lebaron Bonney contactor Vintage...

1946/1948 Ford Columbia Vacuum Control.Everything appears to be Good, Clean Used parts, Although operating condition unknown. Please see pictures, ask all question before bidding. The original parts are very clean an appear in good condition and reproduction parts are new. Although operating...

1946/1948 Ford Columbia Speedometer Control.Everything was cleaned,added White Grease and checked and appears to be Good, Clean Used parts, Please see pictures, ask all question before bidding. Although operating condition unknown because I never tried it. Sold AS-IS