Search results

Looking for a new or like new Dennis Carpenter 40 Deluxe headlight switch knob, part number O1A-11661-B

Just watched a 1942 Lloyd Nolan movie “The Man Who Wouldn’t Die”. The real star of the movie was a 39 Mercury Coupe with some good screen time including interior views and a high speed chase.

When an early Ford V8 (up to 48), was equipped with a Columbia 2 speed rear, what was the usual gear ratio when the Columbia was NOT engaged?

Does anyone know what the BACKSET DIMENSION is on an OEM 56 Ford Fairlane wheel?? Thank you again, Steve

I need 4 OEM style wheels for my 56 Fairlane Sunliner, are Vintique wheels any good? Any recommendations? Thanks, Steve

What is the width of a 56 Ford Fairlane Sunliner OEM wheel? What is a good source for the purchase of a new OEM quality wheel for my 56? Thanks, Steve

I'm running a Bubba GM distributer in an 8BA engine. 12 volt conversion, ballast resister bypassed, Bosch 00012 coil 3 ohm internal resister, GM condenser. Now the question: I need to replace the coil to distributer wire, can I use a 10 gage stranded copper wire??? Thank you, Steve

The car:'47 Ford coupe, driven frequently, 8BA engine, good oil pressure, runs cool, usually starts quite easily. Now the problem: Every so often, perhaps every thousand miles or so, I can't start the engine because it's locked up and the starter can't turn it over. The only way I can free up...

How many leafs should there be in a 56 Fairlane Sunliner rear spring? Thank you in advance Steve

Apparently, there is no commercially available front tube shock conversion kit for a 40 Ford car that is compatible with the front stabilizer bar; yet, some of you have successfully done this conversion. What has your solution been? Thanks, Steve

I have a DC 94 carb on my 40 Ford 85 hp V8, it is about 5 years old. I am running 2lb fuel pressure. Lately, it has been leaking fuel from both ends of the throttle shaft after the engine is turned off. After the last time it occurred, I let the car sit for a couple days and then removed the top...

Can anyone tell me what the best distributor wrench is for the Ford y-block distributor hold down bolt?? Brand, part no., picture? Thanks, Steve

Are there supposed to be cover panels for the access openings on the interior side of the doors on a 56 Sunliner??

Can anyone explain the correct application of which starter plate to use with a cast iron or stamped steel bell housing when doing a later flathead conversion in an early car and why it makes a difference?? Thanks, Steve

I have an ECB 9425 B (55 T-Bird) 4V intake manifold, a Holley 4V teapot carb, and a 56 Y-Block dual vacuum distributor. All in good, use as is condition. Any interest in one or all of these items?? Thanks, Steve

Need a 1956 Ford Fairlane differential crush sleeve, NOS only, part # B6A4662A Thanks, Steve

Need an orig. 57 Ford distributor in good condition for 292/312 Fairlane

Were any Y-blocks factory built for “spin on” oil filters? Thanks, Steve

I disassembled my Holley 94 carb and I noticed that the Pump Discharge Nozzle has a ball at the end of one nozzle and not at the end of the other nozzle. Is this normal?? thanks in advance

Need power brake booster, bracket, and related parts to convert from standard to power brakes 56 Ford Fairlane, original, useable parts only. Thank you