Search results

1932 Ford Victoria bustle. Whoever cut it did a good job at the bottom, but not so much at the top. Back and bottom are in pretty decent shape. Unfortunately, I think it’s too big to ship. Located near Hudson, New York. Please PM for additional information, pictures or directions.

1932 Vicky Subrails in vgc. A couple of spots need attention but otherwise pretty amazing considering. Will ship to lower 48 for additional $50. Please pm for more info or photos or directions.

Hi there - can anyone send me a picture of the underside of the stock floor for a '32 2-door sedan? Specifically the part that is under the front seats? A top-side pic without the seats in could help but I really need to see the underside. I appreciate your time and thanks in advance!

Need help in identifying this part. Wide belt 4 3/8 in diameter. Shaft 1 1/16. Stamped Browning 28K45

Question: Does this part fit (see photos): A) 1941 Ford B) 1946 Lincoln

Hi Guys! Due to a recent acquisition, I could use some help in identifying the following part: B5A7029035 is the part number given and the item is 33in long. Thanks!

Hi Guys! Due to a recent acquisition, I could use some help in identifying the following part: BA7325555A is the part number given and the item is 38in long. Thanks!

Hi Guys! Due to a recent acquisition, I could use some help in identifying the following part: BM7310739B is the part number given and the item is 39.5in long. Thanks!

Hi Guys! Due to a recent acquisition, I could use some help in identifying the following part: BA16003B is the part number given and the item is 33in long. Thanks!

Hello friends and thanks for looking at my thread: a customer brought me a project and one of them involves the installation of a bench seat over the gas tank. The wooden part of the bench is MIA but that isn't my issue as much as this question: did the '35 big truck have a full bench or just a...

Pictured is the back of the 12v GM alternator I have to install in a customer's 24 stud motor. What is the smaller post directly below the positive one? If it's a 1wire it should be ground but is this a actually a 2-wire alt? The only reason why I ask is because it looks like there is a wire...

So my customer's rear wide-fives were shot so I located another pair to replace them. Set 1 came off the truck with normal wheel bearing arrangement: 3" diameter, full depth. When I opened the grease seal on set 2, the bearings were 2 3/4" diameter and a little short depth-wise before stepping...

Hi - having a little trouble figuring out a front motor mount issue - it looks like I have some rivits in the way of having a flat mounting surface. I am using a mount kit available through the normal suppliers. When I put the large washer into the large cup and set it on the crossmember it...

Hi- can someone please do me the HUGE favor of posting to this thread a pic of the assembly of where the pedal set and master cyl meets the frame of a '39? I'm kind of a visual guy and can't find an adequate diagram of how this is all supposed to look. I sincerely appreciate your help and...

Hi - I found this tail bracket that was billed as a "1932 Station Wagon", but we already know that isn't true. Got the fact that it is a driver's side, "D-Pillar" bracket, a little bent, and pretty sure it's Ford as the Model A to '32 (and truck) taillight fit on it, and it came from a...

FOR sale is my 1931 Victoria project. Nice enough car but I have too too many projects and my life expectancy is not long enough to finish them all. This is a mostly solid car with just some light patches in the front cowl. Wood subrails are nice. Complete and almost completely disassembled...

Hi - I am looking for the gentleman who had the Complete Model A Vicky Floor who was set up at Hershey - I saw it after hours and when I came back first thing in the morning you were already gone! Please PM me I hope you or one of your friends reads this!

1929 four door rear door passenger side. Really nice door with original patina. Handles and mechanisms. $100 Red Section 3 RSG37 Ask for Eric (Phone: five 1 eight, six 69, three 0 two 0). Thanks for looking!

2 original brass T radiators - $125 ea Red Section 3 RSG37 Ask for Eric (Phone: five 1 eight, six 69, three 0 two 0). Thanks for looking!

The following items will be available at Hershey Tuesday-Friday until sold!: -Beautiful 1934 Cabriolet/Coupe seat set (Front and Rumble). Brand new professionally installed Elk leather. New springs, foam, wood. Gorgeous new never sat-in, ready to install. $3000 (The lebarron-bonny kit is...