Search results

  1. C

    Belly tanks Model A/B

    My last question about Babbit opened up a new topic about bellytanks. It seems as if there are a few here on fordbarn who race the V4 class in el mirage and bonneville. My question is with the model A/B motors what have you seen for transmissions? For my belly tank I have a 4 speed side shift...
  2. C

    Babbit question

    Quick question about the Babbitt in my model a engine… I took the block apart and all the Babbitt surfaces look good except for the rear main cap. As you can see in the pics. Can the cap be done alone and repaired or do all need to be done and align bored? Does anyone in so cal still do this or...
  3. C

    Wanted: 1934 left side door latch driver

    I have a 5 window coupe and need a drivers side door latch. Thanks
  4. C

    Valve spring issues

    I recently purchased a new set of modern valves and springs from a reputable company. I installed them for a short duration then removed them because I needed to do some head work prior to moving on. I am now ready to install when I noticed that one spring is shorter than the others by about...
  5. C

    Need Mallory rotor

    Hello Fordbarn, I’m working on this old Mallory YL 11a distributor and can’t find a rotor anywhere. Not exactly sure on part number... it maybe the 320m, just from doing a little research. Anybody have one? Or any info? Thanks! Pic won’t upload
  6. C

    Oil pan cracks... fixable?

    During my diamond block build up I noticed these small crack in the oil pan pocket where the from seal goes. Are these cracks a big deal? Is this common? Any thought on a good fix or repair??? Thanks in advanced.
  7. C

    Question for engine rebuilders

    Got my block back from getting bored for .060 new rings and pistons. I borrowed a piston ring grinder to set my own gaps. From what I read I am shooting for .016-.018 for this size bore. On my initial check my gap is .035??? Seems really large without taking any material off. These are quality...
  8. C

    Gordon Smith Air Compressor Governor Side Plate

    Aluminum Governor attachment side plate for Model A/B engines for Gordon Smith Air Compressor conversion. 2 repairs needed on attachment threads.
  9. C

    window regulator right side

    I believe this to be a right side window regulator with original handle. 3 screw pattern, gears move.
  10. C

    Model A round step Original and aluminum

    2 original cast iron with original paint, nice condition. Also includes one newer cast aluminum.
  11. C

    1931 Model A Grill

    Up for sale is a descent condition 1931 grill. Would polish up nicely. Has the usual small cracks and flaws. Please see pics for details. Thanks
  12. C

    Murray body number tags

    190A 3283 black zinc tag Yellow blank Both tags shipped for $80.
  13. C

    Dome Light

    Dome light unknown year or models. Untested.
  14. C

    Brake parts

    Mechanical brake parts. All shipped for $60 obo
  15. C

    Headlight Parts

    Headlight parts for rebuild or placement. All shipped for $60.
  16. C

    Muffler flange

    Hello fordbarners, I’m looking for the flange and first bend in the model a muffler in good condition. Will be using it for building my own exhaust. Need pipe from manifold to beginning of muffler. Let me know. Thanks!
  17. C

    Radiator support rods

    Looking for decent original set. Old paint and rust ok... must be straight.
  18. C

    Cut 35-36 driveshaft

    Looking for inner driveshaft 35-36. Cut in half is ok.
  19. C

    Foot start grommet???

    Does this go on the inside or outside. Thanks fordbarners!
  20. C

    Hub caps NOS 47-48 car 47-56 truck original from Ford

    These hub caps are NOS from ford back in 1982. Not new reproduction. These and other parts were sitting in a storage locker for last 30+ years. Still in original boxes they were shipped from Dearborn, MI to Villa Ford in Orange, CA back in 1982. I will ship for free.
Back
Top