Search results

I bought these for a project that stalled out they are brand new never been installed they will 28-34 model A & B engines. pm me if you are interested.[PHP]

I was saving this for a future project that probably will never get started so I’ve decided I would offer them up for sale and maybe someone else could use them. I don’t need to sell them so no I won’t take half the asking price. What I have is a set of New std model A insert rods with std...

I have some Model B parts I was saving for a distant future project. I would like to sell as all these parts together. What I have is a Model B cylinder head that has been fluxed for cracks and resurfaced, B water pump that has been rebuilt with a leak less shaft seal, B head gasket and new...

Ok I just turned a set of 35 front drums that were rusted. And I measured them after turning them at work. To see if they were still useable. I guess I have wishful thinking that they may work 10k on my Model A sedan. My question is when the spec is .060” maximum that can be machined off doesn’t...

I was going through my box of model a oil pumps to choose which one I was going to rebuild. And found one that someone previously had modified the outer pump baffle/shield. Is this something anyone here has seen done before. If so are there any benefits to performing this modification or it is...

I’m looking for a good rebuildable 30-31 gemmer steering column/gear box. Shoot me a PM if you have one.

Wanting 35 rear brake drum I’m looking for One 35 rear brake drum. The one I got recently is to thin from previous damage. I need a 3 rib drum to match the other side. I attached a photo. Just shoot me a PM if have some.

I have read every thead known and the same question gets asked. Can 1/8” be trimmed off the bottom of a oil pump shield to fit in a older pan? But it never get answered or does it just not make sense to do so because there will be not added benifit? I understand the pans had lowered dipper trays...

I will start off by saying I’m kinda building a prewar hot rod out of my 29 sedan. I know wrong site I should post on the HAMB but I like the Barn too and I’m Going start here. I’m rebuilding my 35 front axle with 32 spindles, and 32 spring perches. And I have a I good 35-36 front backing plate...

Saw this on evilbay last week and I usually don’t buy stuff off there but it looked like a Fumaze knockoff of sorts and caught my attention. Plus it was only $20 so what the heck 1/7 of the price of the Fumaze and I’m sure I can find a pipe in the garage to replace the missing one. I is made out...

I finally found some time to work on getting my 29 Tudor back up and running after a 2 yearn hibernation. So I had most of the parts to rebuild my model B transmission with 42-48 v8 gears, new bearings and thrust washers, and seals. First was to get the used v8 gears in useable condition. So I...

I’m looking for preferably not useable 32-34 model B Ford 4 cyl. Oil pan. I’m only using actually needing to use the back flywheel cover of the oil pan to graft on to my Model A pan. If someone has one laying around please PM me and I will get back to you. thanks in advance Ben

I took apart a Early 1928 Ford Model AR engine and am willing to sell what parts you need. I have all the Early At engine parts most ingokd useable condition. 5 camshaft journal block, 5 journal camshaft, oil pan, Beaver tail crankshaft, dual clutch parts. Just shoot me a PM and what you are...

I got a used powerhouse generator on a engine I paid $50 for last year and I had a new set of brushes I got wit a lot of NOS ford parts. So I decided to see if I could bring this old girl back to life.

Long story short I was disassembling a good used running 30 A motor to reseal and do a cheap freshen up and use while waiting for my other motor to get done at the machine shop. And I was knocking the drive gear pin out with a drift punch and somehow busted a chunk out of the block!!! I was...

I'm in the process of rebuilding my engine. I am rebuilding my oil pump and was wondering what methods you guys use to get the bushings out and in? I have a adjustable reamer set so that isn't a issue as far as the final fit. I also would like to modify the pump to increase the oil pressure...

My question is when a 32-34 front axle, 32 spindles, 32 perches, on a model A and keeping manual brakes. Which king pin set do you use when rebuilding with new bushings and bearings? A model A 28-31 set or model B 32-34 set? Thanks Ben

I have a brand new Snyder's 6:1 cast iron head never even bolted down. Decided to go with a higher compression head. $340 shipped Ben 913-927-3842

I'm looking for a new door glass for my 29 model A 2dr sedan. PM, call, or text if you have one. 913-927-3842 thanks Ben

This is my first post so hello to all. I figured you guys are the ones to ask this question to. I have a good A block and a standard B crankshaft I am wanting to get turned down to fit into my A. I also have a good set of rebabbitted A rods.my question is has anyone ran insert bearings on the...