Search results

I have installed the motor in my restoration process. I have seen this problem addressed on here before but am unable to find the thread. When the old front motor mount was in there, the motor lined up fine. However, it was an after-market mount. I have the mount sold by Snyders. It is keeping...

I am in need of a nice hood. I dont mind paying good $ for a real nice hood. Call if you can help. It must be original, no repro crap. I have a couple of those. Thanks Sonny 913-406-1823 or e-mail to sonny@musclesforhire.com

I am in need of a good late 31 firewall. Also a good 30-31 hood Please call or email pics with parts thanks sonny@musclesforhire.com 913-406-1823

I have a newly rebuilt engine ready for the car. I also happen to have an engine test stand that is set up with radiator and the works. My question is, is it really a good idea to run that engine on the stand before it is put in the car after the resto, or should the engine have the forces at...

One of the members in the club tonight called me and asked about a problem he had this evening with his car. He backed it out of the garage to let it run for a few minutes. After about 5 minutes he lifted the hood and noticed that the bottom of the exhaust manifold and first few inches of the...

When I took off the clam shell, there was water and grease in the assembly. It looked kinda crusty. I have taken the keeper off of the spline in front of the speedo gear, but the gear and bearing will not slide off. It is stuck pretty tight. I have stood it on end and held it off the ground and...

I removed the rear axles housings to replace the seals, I would like to go ahead and replace the differential bearings while I am this deep into it during this restoration, how do you get the bearing off of the axle? It seems to be stuck on there. Should it just slide off of there? Will I have...

Could someone please post a picture of a home made spring spreader so that I dont have to go buy one? Thanks for your help, Sonny