Search results

I’m installing a NOS drag link in my ‘48 Super Deluxe. The fixed ball joint end included a flat washer and a rubber washer. How do these set on the ball joint stud. Does the flat washer sit against the ball joint or against the spindle arm? I believe that it’s supposed to sit against the ball...

I recently removed the wing windows on my '48 Coupe and replaced the seals with the Dennis Carpenter kit. The kit was supplied with 6 rivets. 2 short silver, 2 short brass and 2 long brass. Does anyone know the proper way to install these?

‘48 Radiator Shroud I’m looking for the radiator shroud that covers the front upper part of the radiator on a ‘48 Super Deluxe Coupe.

Does anyone know of a source for the hoses that go from the heater to the defrost vents on a ‘48 Super Deluxe?

Wanted - ‘48 Quarter Window Trim I am looking for a quarter window glass trim for a ‘48 Super Deluxe Sedan Coupe. With or without glass. I need either a drivers side with trim that only partially surrounds the glass or the passenger side with the trim that fully surrounds the glass. I currently...

I'm installing new quarter window seals on a '48 coupe and wondering if anyone has advise on what to use to lubricate the seal so it goes into the channel easier. I want to make sure I don't use something that might damage the rubber seal or cause issues with it staying in place.

Could someone tell me or post a link with instructions on how to install the rear window on a 1948 sedan coupe. I’m just wanting to get as much information as possible before I do it wrong and break it.

I’m getting ready to install the headliner and back window in my ‘48 sedan coupe. Does anyone have any advise or tricks that might be helpful?

My '48 ford has the old style lever shocks (I think Houdaille?). They seem to be in good shape so I was wanting to drain whatever is in them now and replace with fresh hydraulic jack oil. Is it ok to simply drain and replace the fluid or should they be flushed. If so what should be used to flush...

Does anyone know if the hub on the engine cooling fan should get hot? It isn't red hot but is definitely hot to the touch. I have filled it with 80W-90, turned it 180 degrees and let the excess drain out of the fill hole. After doing this some still leaked out where the shaft enters the hub. I...

I'm in the process of getting a 1948 Super Deluxe Coupe barn find going. I've looked at a lot of different wheel/tire combinations and have decided to go with a red steel wheel, dish hubcaps and whitewall tires. I'm just not sure about sizes. I'm thinking either a 15" or 16" wheel and radial...

‘48 Rear Drums I’m trying to find a set of rear brake drums without the hubs for a 1948 Super Deluxe. The hubs are inside mount. Mac’s sells new drums for $130. I think this is crazy, I can buy drums for my 1 ton truck for $80. And I haven’t been really impressed with the quality of parts from...