Search results

Just ordering some parts for my 59A and would like a suggestion of how much bulk ignition lead wire to purchase for a stock configuration system including the coil to distributor? I have the factory tin wire looms. Thank You

After reading around quite a bit I decided to purchase thermostats for my 59A. As I was ordering some parts from a reputable online flathead shop and 180 thermostats where on the menu I ordered a set instead of taking the PN to my local auto supply. Received the parts yesterday and these...

May I ask if anyone is aware of the Dan Brusgard "Needle Bearing" steering column mast jacket kits are still available? I've tried contacting him via email twice now and cannot seem to locate the kit on ebay? I'd buy a kit anywhere if it where available. Thank You

Looking for a photo of the short little stanchion style clip (3" tall) that attaches to an intake manifold bolt and then supports the vacuum tube on its way from the carburetor to distributor. Perhaps this was used only on the 69A engine? I've misplaced mine and would like to locate...

Simple question, Do the two oil baffles on the input and main shafts float or are they fixed once the universal joint is snug? I have a gennie universal joint that I rebuilt with the Van Pelt kit and a stock "cupped" washer in place (not the Van Pelt washer) everything still spins nice and...

I'm looking for eight nice NOS or nice used ORIGINAL style radiator clamps for my 59A flathead, I have currently have reproduction clamps and they don't float my boat. Shipped to WA 98230

I'm somewhat desperate for a very nice pair of these clips for my 35 or 36 headlights, parts will ship to WA... Thank You

I'm looking for an old chrome dash rail cover for my 28/29 rpu. Thx

I would purchase a very decent set of 28/29 fenders, aprons and running boards for my RPU, in a perfect world they would have old black paint and be on the west coast at a good price. Thank You...

Can anyone tell me what size tap is required to tidy up the threads in the snout of my Mercury crankshaft? Thank You...

Was hoping someone would get an accurate measure on the main (top) hood hinge rod on a 28/29 hood for me. Mine was in very bad shape and even worse after removal.

I am looking for a clean USED bed centre plate tin cover for a 28/29 pick up. Something that is used but very presentable in an as is form. Shipped to Seattle 98027 I would also purchase a complete set nice used steel centre strips of a set was available. Thanks

My oil pump (59A) has been taken apart, cleaned up and checked for wear my the machine shop. I am looking for the gasket and or seals for the pump lid and relief valve. I have tried a few places locally and Patricks but I'm up short. Does anyone have a solid suggestion where I can purchase these...

I have fixed up my 40 wheel with JB Weld which turned out very nice. I am going to paint the repair areas as minimally as possible and was wondering what one would do to buff or polish back the black spokes and rim where there was no work done? I did go over the whole wheel with some green...

It's time to install the cylinder heads on my 59A. I have this assortment of various length studs that came out the engine when we dis-assembled it. This engine was in nice shape and by my standards was quite original and undisturbed but obviously at some point it had some studs changed. I...

Fast track your '32 build with this great old chassis COMPLETE and ORIGINAL and perfectly suited to using as is with some easy elbow grease clean up type work. Runs well, rolls and steers, would drive with a firewall and throttle pedal added, ready to drop a body on and go, only non 32 piece is...

I am looking to purchase a good quality set of cloth ignition wires with appropriate ends for my 59A that will work with stock tin tube wire looms and a good quality mechanical fuel pump also. I believe Napa sells a good pump? Input on where to get nice quality items would be great. Thanks.

Looking for an Aristocrat Dash insert to fit 28/29, old reproduction is fine. Would be great with some old SW gauges. Shipped to WA. Thx...

I'm looking for an Aristocrat dash insert for my 29 RPU. An old aluminum reproduction would be great. Shipped to Seattle. Thank You

I am looking for several (eight) of these rounded head bolts with the proper deep nut, I think they are from a Model A. I am using them to attach the lever shocks and steering box to my Model A and like the look of them. Shipped via USPS to either my WA shipping address or better yet to me here...