Search results

Help an old Hot Rodder out guy's. I need the height of the grill shell measured from the top of the frame right behind the radiator to the lip of the grill shell that the hood sits on. I do not have a stock rad to use for reference. I will be using stock hood on my full fendered Coupe...

Need 2 1930 front fender braces. Looking for the round forged type, not the stamped steel. These are for a Coupe body style. Thank's, Rich

Guy's: Trying to identify all the frame holes, what they are for, and what size bolt. I have 4 pics with the holes circled, and marked. I have identified most, but still need help. I think 1, and 2 are proably alternate hood hold down options? Thank's, Rich

Do the fenders on 30-31 interchange between Coupe, Roadster, etc.? I assume the fronts do? Are the rears interchangable? I'm going to look at some that the seller is not sure of what he has. I've been searching the archives, but not getting much info. What are the main differences between...

Can someone give me the exact length of the center hood rod on a 30-1 hood? I have the side curtain rods, but not the top. Thank's, Rich

Maybe someone can guide me on installing these dovetails. All I had was a little bit of dried rubber in the doors, scraped it clean. Recieved the new pieces today from Mac's. One pc of rubber is too small, two pcs are too big for the door pocket. Clue me in before I start cutting! Rich

On my 31 Coupe, the windshield frame has some mystery holes in the upper frame. I realize the wiper has to use some of the holes on the drivers side, but pass side has some also. Help identifying all holes would be a big help. Thank's, Rich

I have the sheet metal cover screwed, and nailed to the header above the windshield. I need to know the screw size, and type that holds the windshield hinge to the bottom of the header. My 31 Coupe has 10 holes in the hinge bracket. Thank's, Rich

Need a little help guy's. Iv'e been piecing the front sub frame together on my 31 Coupe. Some one had chopped it up pretty badly, and it was also rusted away. I'm ready to weld the last piece in, but am not sure if it is correct. Here's a pic, the arrow points to the space between the to holes...