Search results

My tired early '36 motor developed a rod knock. Upon inspection, the main bearings check out but the rod bearings all need replacement. The rod I.d. is 2.225" (2.220" stock)and the crank O.D is 1.989". (1.999 stock) According to the chart, I will need the "G" size bearing but I'm sure they...

Fellas, I just picked up this chassis from a guy who was going to cut it up for a RAT Rod. Fortunately, the project failed and I was able to bring it home. I am a little puzzled as it is not like any other model a frame parts I have encountered. Here are the clues. Any insight would be...

This part came off an old '28 floorboard. Anyone recognize it? Starter or throttle accessory. It appears to extend the reach of something coming through the floorboard. I have never seen one before.

Here is an orignal 28-29 open car dash bar that runs between cowl posts. It has pits but is very solid and useable. Please send a PM rather than posting a reply which I rarely see. $60.00 + shipping

I have had these carbs kicking around for awile and it is time for them to find their righful home. These are late model flathead Merc carbs. I am no expert on fitment. They are 4 bolt mount. Out of the 2 carbs...You can get one working one for sure. $40+ shipping. Please PM me for details.

Here is a complete set of 4 19" wheels and tires. They run true and are rust free. I had them stripped...there is no major pitting anywhere on the rims. The tires on them are older Garfields which were also in good shape so I put new tubes in them and remounted them. the caps were a little...

Fellas, Does anyone know if the 1933-34 repop wheel wells from SARS, Macs, and howells are from the same manufacturer? They sure look like it. Picture #1 is from SARS #2 is macs #3 is Howells

Here are some original (primered) and some aftermarket parts (bare steel) that would make up a 1928 and 1929 roadster rumbleseat floor. I am going another direction and will channel my car. Represented are; 1) seat riser (new aftermarket) 2) curtain pan under seat pan (original. good shape...

Here is a matching pair of Texas licence plates. They have been given an electrolysis bath to remove rust and then primered. They will need to be restored. $75.00 +shipping

Here is a stock air cleaner assemble that went on a late model Merc flathead with those strange 4 bolt Holly Carbs. It is in really good shape with some original paint and stickers. It has all of its parts. 1948 1949 1950 ?? 20 bucks + shipping

This is unusual. Here are 21 jars of speedometer parts. They were purchased at an all Ford auction but I cant be sure what years they are all from. It appears to span many years. Some jars are full...other less. Most parts seem to have been used but a few look like replacements. There are...

Here is what I believe to be a v8 60hp water pump. It came from an all early ford auction. Looks to be rebuilt as the impeller has no decay and the rubber nose is also perfect. It spins. Pulley is in nice shape as are threads. Very sound piece. 50$ + shipping.

Here is what I believe to be a 1923-25 open car brass light bracket. It is from an auction that was full or original T stuff. it appears to have been sand blasted which cleaned it up nicely. $15.00 + shipping.

Here are 3 Starter crank rachets. two are worn and the black one is in pretty nice shape. It also has "Ford" and "T528B"? stamped inside. Anyway....all 3 for $20 + shipping.

Can anyone identify this part....It was in a box of parts at an auction that was mostly "T" parts. I am now expert. Anyone recognize?

Here is a nice pair of aftermarket rumble grab handles for sale. They were in one of several boxes from an auction. They are in very good shape and dont appear to have ever been mounted. The surface is lightly scratched from kicking around the box but would easily polish out. All hardware is...

Up for grabs is an original 1932 spoon throttle pedal. It was a nice surprise in a box from a auction. It is in great condition for its age and still has some black paint on it. Casting marks are still on the spoon end. The balls are also very very nice and round. It moves freely and the threads...

For sale is a solid pair of original Texas passenger car 1932 license plates. There are a few pinholes where somone tacked them up to the wall....otherwise great candidate for restoration.

For sale is a complete set of nice quality aftermarket shock links. All parts are represented and ready to be bolted up to your project. $60 plus shipping. Please PM if interested. Do not post on this ad.

Hi Fordbarn! I was given this babbited 1936 flathead motor. It supposedly is a runner. It does turn over and has compression. This weekend I would like to start her up and see if indeed it will run. I have taken all the precautions of pre-lubeing the cylinders, priming the oil pump, fresh gas...