Search results

Can anyone give me some input on Diamondback tires.I have cokers 450-4.75-16 on the front of my AV8 (biasply) ,need to replace them.I want to go with the 550R16 from Diamondback (radial) they have the same look as the bias tire but are radial.

Can I run radial tires on wide 5 rims.I have Coker bias ply on them now , would like to go to radials.Thanks in advance for any info.

Hello , I have a 8rt in my little AV8 that I've been driving for about 6 years. A little history before I ask a question. I never took the engine apart other than the intake to clean out the valley and did a compression test and all the cylinders were close at 95 to 100 lbs. This has been a...

Looking for 3.54 ring and pinion gears,6 spline pinion. Thank you Menno

Can anybody give me the over all width at the widest point of a 39 ford standard coupe.

I am putting a fenton 4 barrel intake on my flaty,does any body the torque specs,also is there a patern I should use.

Just wanted to show a picture of an axle I broke 2 weeks ago. It's a 39 truck axle I have on my AV8.Lucky for me I was just taking off went it broke.

Can any one give me a source for 39 front wheel bearings and races .I looked in Mac's,they have them,(45.25 per wheel). I wonder if Motion Industries would carry them.If they do,would I use the same numbers that Mac's uses.

Went to change the oil today on the flattie,after I drained the pan,went to put plug in and the threads are almost gone.It only catches the bottom threads of the plug and will not tighten up.Any suggestions on how to repair this without removing pan. Menno

Can anyone tell me what is the correct lubricant to put in a F1 steering box.

I'm going to be in Savannah Ga. the first week of April.Is there any swap meets or events in the area that I can visit.

Is Bob Drake the only source for 39 coupe sub rails.

Hello, I'm looking at a columbia 2 speed rear end,I think its a 39 because it has juice brakes and wide five rims.I spotted it at a local yard ,they don't know when it was in use last,it still has the wishbones and the tube attached(drums and wheels also).The owner says he has the controls...

Hello, Anyone know who carries 39 gas pedal parts. Thanks

I'm building a 30 coupe hotrod,using a 32 front axle.The camber is visibly off on the passenger side and may be slightly off on the drivers side.What would be the correct camber angle.I know this is not a hot rod forum ,and it may rub some people the wrong way,but this is a very traditional hot...