Search results

hi I'm chasing the correct fitting snap rings for the following Brake/Clutch pedal Shaft Kit (O1A -7506-S) Must be correct size and correct for shaft groove. Would anyone here have a new pair or know of who supplies them? TIA Tom

I have a 40 Dlx Grill, cast centre section, that is cracked half way down. Problem is here in Australia, grills are hard to come by and not many old school welders left that can weld the Die Cast Zinc Alloy. There was a old guy down Brisbane area but has recently had a heart attack and...

Hi Guys, Chasing, replacement spring for the 1940 Hood Catch Safety Assembly. I have 2 units, with both springs, rusted and broken in pieces. I see you can buy the whole units,, however I am just after the springs. Would anyone know, who is reproducing them or sells them? TIA

Hi, I am after the following headlight sealed beam adjusting kit for the 1940 Dlx, headlight buckets. (O1A-13032-HKc) I have checked all the main suppliers (as at 1 March 2023) and all show they are out of stock. Q? anyone know a supplier who actually would have a set or, would anyone...

Hi , would someone have pics of the 39/40 emergency handbrake pawl spring, install position, as the spring in my lever was rusted out. TIA

Hi I am after information as to who makes/supplies the safety catch spring for the 1940 Ford. I have a few catches but with broken springs,, so am needing only the springs TIA cheers oz40

Hi Guys I chasing a pair of the duel latch mechanism "springs" for the 36 ford as per the attached picture. Preferably VGC or NOS. Thanks in advance oz40.

WANTED .. The Front Vent Window regulators LH & RH side for our 1946 ford. Prefer NOS but very good condition can do also. Ours have broken shafts and damaged teeth.

Hi I have two 40 dashes ,, one early the other late production versions. The issue I have is broken bolts that hold the instrument cluster into place. Attached is a pictures of the two dash cluster tabs and bolts used. Does anyone have any of these small bolts spare or know of who has/supplies...

Wanted interior light switches for my 40 projects. The style and versions that I would like are as per the attached picture. TIA

WANTED... I'm needing a set of LHS Front door hinges for my 1936 flatback sedan. Prefer good conds set.. TIA

WANTED. I'm chasing the '36 headlight swivel bolt retainer spring.. Can any Fordbarners help out, who may have them or knows of who supplies these.. Prefer NOS or in very good condition, if not available repo. Thanks in advance. oz40 (Tom)

Hi, does anyone in the area have direct contact with (Fred) Southside Obsolete. I am interested in getting some small parts from him, and have tried calling the number from here in Australia, but his phone system doesn't recognize unidentified numbers, such as overseas calls. Is a fordbarner...

I have a 1936 Ford , 4 door Flatback sedan that I am repairing for my daughter and son-in-law. Can someone please advise as to the correct bolt kit that I would need for the door hinges.,, and who does supply these. TIA cheers Tom

Can I please get confirmation as to the correct window regulator repair kit needed for my aussie 1940 Dlx Sloper. I am converting my factory window mechanisms from the Aussie spline regulators over to the US square shaft versions. As there is neither reproduction handles or the regulators are...

I'm in the process on setting my motor into the chassis on my 1940 ford. I would like to hear from my fellow fordbarners the pros and cons on the after market engine mounts as I have heard stories they collapse due to the quality of the rubber. Or is there anyone selling NOS or have a quality...

WTB,, 1935/36 Ash Tray retainer bracket to suit the version as in the picture..

WTB the inner tin pieces on the inside area of the A pillar, specific to the 1940 ford sedan/coupe . Pics for reference. TIA

Can any of the fellow FordBarners please, tell me why there is two different length versions of the 1940 cowl vent handle, as used by Ford in the sedan/coupe bodies,, Was it because of the heater clearance issues. Reason is I have a sedan down here in Oz, and it used the short version as per...

I need to replace the pawl springs in my 40 handbrake lever,,what is the method to pulling the lever apart and what replacement parts are needed?? TIA.. oz40