Search results

Need an original transmission cover (floor pan) for a 1936 Ford Passenger car. Please PM me if you have one for sale.

I have a 1936 LB I'm getting ready to rebuild and would appreciate some suggestions and help. The motor came with flat top pistons but had replacement cast iron dome heads. I have original aluminum heads for flat top pistons in my stash. Regarding pistons, are all the 3-1/16" pistons...

Would anyone have pictures of an early 1936 Cabriolet original interior that is NOT leather or Mohair? I am restoring an early cabriolet with the grey dash and want to see what it looks like with the original cloth interiors. Any help appreciated.

Seat pan found! Thanks.

Would anyone have the dimensions of the side plates that support the package tray wood for a 1936 Ford cabriolet? Any help appreciated!

Want a good original used, rebuildable, or NOS gas tank sending unit for a 36 Ford passenger. Unit fits years 36 thru 40. NO REPRODUCTION UNITS! Please PM me with what you have and price. Thanks, Wayne

I was reading in Vern Tardel's book that when installing the valve springs, the tighter wound coils go to the top (valve guide) and the looser wound coils go toward the valve stem end. Does anyone know why or what happens if they're not??

Whats the cheapest way to ship a small part (6" by 6" x 4" and 1/2lb) from the US to Canada? Not in a hurry just want it to get there.

Happy fathers day everyone! I was reading the previous thread about how hot is too hot and it got me to thinking about my own car. I have a stock 36 with the liquid filled glass bulb temperature indicator. It has a low line and a high line separated by about an inch. Here in Houston its been...

Does the pinstripe on the 36 Fords extend all the way to the surrounding grill trim ring on the front grill or does it stop to a taper just short of the trim. Also, how wide is it. I looked in the V8 Club 35/36 book for the info on the pinstripe but did not see any. I assumed the bodies were...

I had an interesting problem occur the other day. I was in my completely stock 36 with a stock six volt system and Optima battery. I had been running fine for a while and was sitting at idle and the engine died. When I pressed on the starter switch, it acted like the battery was completely...

I was reading the earlier posts on type of oil to use in the transmission based on incompatability with the bronze/brass material. (140wt GL-4/5). Iv'e never really paid attention to the 90-140 wt oil I have used in the past and have never had any problems, then again I don't put on many miles...

WOW, I like the new Barn!! Went to the Aeros and Autos show at Ellington Field in Houston last weekend. Over 300 cars, out of which mine was the only V-8 Flathead! There was a young fella there with a nice original 1920 T pickup and one other guy with a restored 29 A 2-door. It's pretty...