Search results

Hello I am looking for a pair of inside sun visors or what ever you have for a 31 slant windshield Thanks Pete

Hello, I am going to do a brake repair on the car and have been thinking should I put in woven linings or molded linings, is one better than the other in stopping distance what do you think, Thank you for your help

Can someone tell me how to adjust the break light switch,mine if you just put your foot on the pedal the brake light comes on with no pressure what do I do.Thanks

Sure need help with this one, my hood is off of alignment with the hood latch all four of them, the hood needs to move to the rear of the car and there is no room to move it because the rear hinge on the fire wall can not go back,The car is 31 four door slant window 166B . What do I do. Your...

Need help for rear wood arm rests for my 31 slant window 160B or a sketch to make them any help would be Appreciated, Thanks Pete

Hi can someone tell me what size thread the nut is for my vacuem wiper for my slant window i need to chase the threads, Thanks

Hello can someone please tell me when did ford start putting the little bump in the inside of the rear fender. i have a 31 slant winshield mine was made in february of 31 i just want to know which ones to use i have both with the bump and without. as always thankyou so much for your help Pete

Hello, I have a 31 slant window a 160 B i have a few rear fenders and some have a little hump on the inside of the fender were it bolts to the car and some do not my car was made in february 31 so what do i use, as always thank you for your help Pete.

Need help i have a 31 s/w the left and the right front doors do not line up with the rear doors both front doors are lower than the rear doors by less that a quarter of inch, how do i make the front doors the same as the rear , Thanks for your help

Hello is there a way to fix a 31 radiator shell there is a crack on the bottom on the left side, can it be fixed ., Thanks

Hello i am looking for a right rear fender for my 31 S/W or one that will work Thanks

Looking for a right rear fender that will work for a 31 four door s/w 160B Thanks

Looking for a right rear fender with the hump in it for my 31 S/W 160B Thanks

Hello I have 31 S/W, I want to add the floor board reinforcement brackets to the bottom board were do i put them in the middle or near the edge of the board, Thankyou

Looking for a right rear fender for my 31 S/W 160B with the bump in it , Thanks Pete

Looking for a original dome light switch cover for a slant windsheld 160B please let me know Thanks

Newbe Question , I have overhauled my 31 generator i put in new field coils new brushes cleaned it on the inside and outside new bearings it is like new, I have tested for shorts with my meter and no shorts.So when i hooked the generator up and ran the engine my amp meter is not showing a charge...

Newbe Question, I want replace the glass on my 160B and i want to do it right by having the glass etched , Brattons has a service that they will etch the glass or i can buy a kit from roy nacewicz etching kit from him and do it my self , I have not seen what both look like can someone let me...

Newbe Question, I am trying to put my 31 hand brake back together and i am having a problem, how do you keep the spring in place on the rod ,what holds the spring in place,Thankyou for your help Pete

Newbe Question, Can someone tell me where the main wire for the cowl light comes in through, is it the floor board or the fire wall ,thankyou Pete