Search results

i had 411s now i have 325s the one i have now is a #20 i believe i need a #17 or so so my speedo will read right i also have 700 tires in rear. If anyone can help me on this one. thanks billy

here my delema i have a 40 rear end and torqe tube. the bearing in the middle came apart as in the rubber around it came apart. it has been shortened to fit a 32 chassie i always have had a vibration since i built it. at speeds between 53-63 so ive heard they dont make the bearing with the...

any pics of how it should fit and look. thanks billy

on my older motor I had a oil return on my pan my new one dosent. can it put on the dip stick tube like braze a fitting on there to return into the pan. I don't want to mess the pan its chrome. also on the back of the block has 2 outlets one for gauge and to the filter will I get a incorrect...

need one for my build thanks billy 951 536 6911

wealth of knowledge here someone got to know. I need one for my car. thanks billy

looking for a friend needs one to finish his car . 951-536-6911 billy

i have friend that bought 32 front fenders but needs 34 he will trade. email me ill pass it to him thanks . billy.

who sells 10 over size rings for standard bore 4 ring pistons in a 59a block. i'm freshing up a block i have a new set of sealed power rings i checked the ring gap its at 25-26 on the feeler gauge. the book says it should be 12-17. any good flathead gurus out there? maybe burt lancaster will...

who sells them i need the top compression rings for my standard 59a block. thanks billy

i have 59a block standerd bore its a nice block but the guy i got it from said it smoked he gave me a new set of rings what should i gap them at? we honed it aleady looks like new' i putg one of the new rings in to fit it it had a 16th gap or should i get over sized rings and grind them?i dont...

Got bad news today my 39-48 eddie meyer head is not repairible the guy i have welding it is very experinced welder and the head has spider cracks in the dome aera into the plug hole its in bad shape so i need to find one or a pair that someone might have one orphan or a pair. I want to get my...

need a set for my car anyone got some old ones lying around let me know.the seat i had in my car was a loner so i have to give it back. thanks billy.

is it up or down. did it change on steering wheels? are they all on top or bottom? thanks billy

cast aluminum water coolers ruff casts need finished steel insert rare. local pick up. 1-951-536-6911

4 inch 49-53 crank drilled for more oil flow. 20 over . free 59a factory relived block has crack on pan rail. 1-951-536-6911

have a few pairs left. local pick up -951-536-6911

had this on my roadster the one on rod n custom mini pages. local pick up. 1-951-536-6911

ok got a 59c block to build this ones got some numbers stamped on top driver side rear on top *799a 1865950* those are ford stars just like the one's found on frame's and the bell housing has 59c. i have seen lots of blocks with 59 on them i have 5 just never c. and the #s 829144 above it...

ok got a 59c block to build this ones got some numbers stamped on top driver side rear on top *799a 1865950* those are ford stars just like the one's found on frame's and the bell housing has 59c. i have seen lots of blocks with 59 on them i have 5 just never c. and the #s 829144 above it...