Search results

Recently purchased a 31 Roadster without side curtains. I have been able thru a friend to get samples to have them made. My question is this: how far dose the rod fit it the door and should it lock in place and not rotate. Mine stay about 3/4' above the door when inserted and can be rotated...

Started working on my 28 roaster p/u. I encountered a different cross shaft than I have seen. Its 3 pieces. My question is, dose anything belong between the shaft and the U clamp where it is supported out at the frame? I have lots of movement front to back. Should note this is early, no...

Has any one tried this addative? I am thinking of running it this summer. I already know that if I run straight water that my engine runs about 8 degrees cooler. Curious if there are any down side to this addative before I try. Thanks for any input.

Looking for a black top to put on my original roadster PU. can have small tears and discolorations. Don't want a new top, would take away from the patina!

Looking for a useable used allstate 450x21 tire to use as a spare to match 4 existing tires I have.

In rebuilding the generator which way do the brushes get installed. with tapered end of the brush with the rotation or towards it? Another way of stating it would be should the long end of the brush be toward the side of the communtator when the comutator is passing the brush, of should the...

I have a generator that I got with and engine about a year ago. Checked to see that it had the new bearing installed, it dose. Put back together, and spin with my electric drill and I get 12.7 volts output. Is this normal output or has someone put 12 volt fields in it? The fields look new...

In spring I rebuilt the front end steering on my 30 Coupe. New king pins and bushings, and two new steering arms, and tie rod end kits. Everything works smooth and free. Before I hooked up the drag link I tried the steering wheel, It seemed a little tight and hard to turn. I put it together...

Replica of Henrys first car. Professional built, solid oak, new briggs & stratton engine hydrastatic drive. antique lights front & back Rich @ 215-536-844three.

Being a novice, could some one explain the difference between a 1930 standard and deluxe coupe. Accessories, interior, lights ??? Thanks Tim

Searched numerous, threads but did not find any help on how to trim the gasket for the front main seal. Do u trim flush with the pan?? I did force it in the grouve with a piece of round stock. have about 3/16" overhang each end.

Looking for a nice pair of 1930 PA Plates. email what u have: talwrench@yahoo.com

This site has given me a lot of help as a new 1930 pick-up owner. After researching about changing from negative ground back to positive I think I have done it correctly, but would like feed back When I purchase the truck in January it had and 8 volt battery connected negative ground. It was...