Search results

Hello, Can I assume that Grease fittings on my steering box, 7 tooth, are incorrect? What if there is grease in there? I acquired the car last August and have no background on the car. Thanks!

My 28 A Tudor is sagging by 1 1/2 inch. Where would be a good place to look first? Thanks

Do Inserts replace Babbitt Bearings for crank and cam - elsewhere? What would a person need to buy when replacing rods and pistons with new. Thank you.

Until I can afford a conversion steering box (approx $800), does anyone know if a steering stabilized would help with the play in the steering wheel? Thanks.

I recently replaced my head gasket on my '28. After some thought I thought that I would put in a thermostat along with a temp gauge. I want to buy a new water outlet neck with a hole drilled and tapped for it. If I remove the old neck, and replace it with the new style, will I screw up the...

Hi, Happy 2018! Below should be a picture of a shackle. Am I correct that those are old school grease fittings and that the second picture is the tip that's required to grease them? Thanks.

Hello, I have a 2 tooth steering box and column I had out of a '31 coup. I would like to replace my 7 tooth '28 steering box and column with it. Question: Is this a simple swap out, or are the two so dissimilar that I should expect issues? Thanks!

Hi, Any idea if this is a Ford color(primary Body color)? It looks more greenish to me. How about the trim? Thanks!!

When I Pulled my distributor out of my model a to put a new head gasket on, the 2 shafts of the distributor were not attached. Are the lower shaft and upper shaft supposed to be connected .Thank you .

Hello, Does anyone make 21 inch 4.5/4.7 Radial Tires? I would love to put radials on my 29 Tudor. Thanks, Dan

Out of nowhere my Horn / Light Rod in Steering rod will partially pull out as I corner and in doing so turns my horn on. Is there a clip at the end at the switch? I took it apart but see no way to make this stay in place. Thanks

I have a 1928 Tudor. Often I come to a stop, the passenger front seat (and I assume the driver side would do this too if I weren't in it) flops forward. It's an annoyance and somewhat dangerous when I am try to down shift. Are there locks available for the fron seats, or is this the way it...