Search results

I picked up a 1937 Ford Tudor. Found these in a box of parts. What are they for?

I pickup a 1937 ford Humpback. The clutch pedal sticks and is slow to release. The pedal shaft seems to have slope were it goes through the mounting bracket. Any pressure on the shaft seems to cause the clutch pedal to bind up. Is there bushing there that I could replace? I don't see where...

I recently Picked up a 1937 Ford Tudor Humpback. My problem is the clutch pedal sticks when releasing it, when in gear and the car running. About the time the clutch should engage the pedal stops. That's about 85% of the time. I replaced the clutch plate, pressure Plate, throw out Bearing and...

I just installed my motor in my 1937 ford. I bought the mounts from steel rubber products. Every thing seemed to fit just fine until I inserted the bolts. they come up short. I discovered the rubber seems to be taller on both rubber pieces then my old ones I pulled out. The bolts are the same...

Hi guys New flathead owner here. I have a 37 ford Tudor Humpback with the 85hp. My issue is the clutch pedal sticks when releasing the pedal. About the time the clutch should start engaging. But only when the motor Is running and in gear. Neutral works fine and when engine is off, all gears...

This appears to attach to the bumpers. Anybody ever seen one?

It was found in a bucket of parts. Mounts right up and works just fine. But not sure its for a model A specifically. I put more pics in a album.

I installed a Weaver Crane to my truck and I'm surprised at how well it handles. It brakes just fine. Don't feel as if the extra load is pushing me as I brake. It takes turns without leaning like I expected it too. Rides smooth with a new rear ten leaf deluxe delivery spring by Eaton Detroit...

In just 170 miles the Nylon drive gear striped out after installing a rebuilt speedo meter. Damage could have started before installing the speedometer. Any thoughts on what may have caused this before I install a new gear?

So is there nobody making rear leaf springs today? I hear two companies went out of business. I can find ones with the reverse eyes. But I don't want to drop 2" :eek:

I'm looking to add a weaver crane to my 1930 pickup. I found an old ad stating its shipping weight 450lb's. I installed the Ken Davis tube shock kit on both front and rear. New front spring and looking to replace the old rear spring to a 10 leaf. I have seen a ten leaf with three of the leafs...

Has anyone received their engine from Antique Engine Rebuilding since they changed ownership? I'm about to send mine off soon for a long block rebuild. Just wondering what the word is on there work. The good, the bad and the ugly! Any reply would be greatly appreciated. Dale

Looking for a weaver auto crane or similar.

In search of a WEAVER CRANE.

Antique Engine Rebuilding Is now under new ownership as many know. I read in a thread there is concern whether the entire business was sold and if we can still get the Insert bearings in the future. Yes. Here is part of my Email from them concerning the issue. We have purchased the whole...

What is it? Crankshaft pulley shim? :(

I have some equipment for a model A or T snowbird or snowmobile. I hear them called both. My truck was setup to accept this equipment as an add on. I have no use for this stuff so I'm looking to sell it all. Any idea where to start, Forums, blogs or any website that would attract such interested...

I have some equipment for a model A or T snowbird or snowmobile. I hear them called both. My truck was setup to accept this equipment as an add on. I have no use for this stuff so I'm looking to sell it all. Any idea where to start, Forums, blogs or any website that would attract such...

I'm trying to identify this interior light fixture. I was told it was to a Model A. The Model A guys say NO! Can anyone help identify it?

Is this a model A interior Light. If so what cars or trucks was it used in?