Search results

Hello, I am searching for an oval generator cut out. Thanks, Tom

Hello, I am in search of a pair of Bob Drake '34 Ford vulcanized running boards. Thanks, Tom

Hello, I'm looking for a '33 or '34 five window coupe, older restoration flathead power. What do you have? Scammers need not reply. Tom

Hello, I am looking for a pair of 1936.front and rear rocky mountain brake drums. Tanks, Tom

Hello, I thought I would post this information regarding ignition condensers, this info was posted on an antique motorcycle site that I am a member of. I have not used this product, but I intend to in the future, with the poor quality of condensers available today this will give you another...

Hello, I'm looking for '36 Rocky mountain brake drums, front or rears. Any condition. Tanks, Tom

Hello, I took a "59" block to the machine shop recently along with some new internal components, among the supplied parts were a set of N.O.S. Ford hollow lifters. I'm a little gun shy of the current Johnson style lifters, improper material or heat treatment, causing the lifters to fail. My...

Hello, I don't know if this video has been posted before, I found it interesting. https://youtube.com/shorts/oykW6pvULm8?feature=share Tom

Hello, I am looking for a radiator shop that can build an authentic 1932 Ford V-8 radiator core using my formed header panels (images). Does anyone have a recommendation? Thanx, Tom

I needed to remove the rust from an engine crankcase and other assorted parts. I wanted to do this effectively, without damage and it had to be cost effective. I have used Evap-o-rust with excellent results, but the price of the product has gotten out of hand. After a conversation with a friend...

Hello, don't be alarmed - this is only a test!

Hello, looking for 1932 roadster side curtain irons. Thanx, Tom

Hello, I'm looking for a 3:78 ring & pinion for a late '32 (10 spline). Thanx, Tom

Sun distributor tester modifications, for those of you that have a Sun machine, click on the link for some interesting improvements.https://youtu.be/ORabuWpZuXI Tom P. S. Be sure to check out his other Sun machine videos. TW

Well, not quite a miracle, but now that i have your attention . . ., i wanted to show you how i went about installing a hidden pcv system in my 81A motor. I used an original '37 intake manifold and i wanted each cylinder to share equally in the controlled vacuum leak. I'll let the images show...

Interesting film, the good old days weren't so good. https://youtu.be/VjH4pCatx0I

Hello, i'm looking for eight NOS, NORS, cast three ring pistons 3 3/16" x 3 3/4". Domed pistons, 3.187". Thanx, Tom

I have a 239 c.i.,full floating rods with 10 k onthe clock. Changed oil today, bearing material in the oil (small, thin flakes), so the motor is coming out. My question is, i have a new Melling M-19 pump, can i use this pump without any adverse effects? I didn't mention, the motor will be...

Hello, I'm m looking for '36 front and '36 thru '39 rear Rocky mountain brake drums in good condition. Thanx, Tom

Looking for one or more '36&'37 Lincoln Zephyr spider hubcaps. Thanx, Tom Walker