Search results

I'm not really sure what I have or am missing here. I have what appears to be a freshly rebuild engine that was sitting on a later steel pan. This aluminum pan was with it. The short tray is attached and the painted one was loose elsewhere ... I don't have the original oil pump in the engine...

With more time to think then to work on things lately, I've recently gone down the rabbit hole of learning about 1932 Sedan Deliveries. I have a somewhat rough Tudor sedan and always have liked the deliveries when I see photos of them. I have a 39 sedan delivery so I'm not sure why it is on...

I am working on a pickup and the wind lace trim is missing. I was wondering if this is available, reproduction. I can make something if needed but seems like it may be available? I haven't been able to locate anything other then very expensive originals. Next, are there any drawings available...

I ended up with a downdraft manifold for a model A\B and it seems like a match to a Detroit Lubricator. I'm sure other carbs match also but it had me thinking that a DL from a 32 or 33 might be a good match to a very slightly hopped up B in a 32. Has anyone tried this? Any good or bad to giving...

I am working on a 32 roadster with a B engine and wondering what the story may be with the attachment of the vibration damper. There is only 1 bolt with the cup on the back going through the insulator. The other 3 are hidden behind the material. Seems really odd to me. It doesn't appear to be...

I just picked up this oil filter setup. The mount is labeled for a 39 but doesn't seem like it mounts like the one in Kube's photo. Does anyone have any mounting instructions for these? Thanks! Zach

I ran across this tail light in with some other stuff recently. it appears to fit as a right side 32 tail light stand but its surely different then anything ive ever seen and seems like it would be upside down with the wiring exposed to the top. Anyone have any idea? maybe not Ford at all...

I'm trying to determine on a 1928 body. The cowl sides went from the short welting flange to the longer one. Did this change happen at the same time that the firewall went to having the "bump" recessed at the edges? If so when did this change happen? If not, when did each change happen...

I just saw a few model A's traveling together through Clarks Valley near Dauphin PA. We moved here about a year ago. Just wondered if there's a local group to the area. Not just a local MAFCA chapter. Always good to know the old car folks around your new house. I caught the end of the line but...

I'm looking for cast iron Cylinder heads with part numbers 77-6050B which is 21 stud. Also 24 studs with part numbers 81AS-6049 81-SB 99AS-6049 99-SB 19AS-6049 Possibly 01AS? Which I believe would be later 8BA style. Any help would be appreciated, willing to buy singles also to make pairs...

I noticed that my door gaps are tapered pretty good and someone added shims to make the latches work. The culprit I believe is the rear of the frame is bent down from the kickup, rearward. You can see a noticable budge above the axle. Has anyone else dealt with this somehow without removing the...

I'm guessing this wiring was replaced at some point in time but before I pull it out and replace with new, could anyone tell me if this is actually originally the wiring that would have come on the car? In the name of safety I will likely still replace it all as some has deteriorated quite a...

I'm looking for an original or really old aged floorboard for a '32 Roadster. the flat board with the hole for the battery. I have the toe kick board and the battery cover, but nothing else. This is for a car that appears to be original aside from a repaint of the body, so I'm trying to find one...

I'm looking for early speed equipment for Ford's. High rise intakes, heads, etc. Let me know what you may have to sell or trade. Thanks Zach Suhr zach@suhrsc.com 717-469-5541 www.zachsuhr.com

My car needs a top and I am working on fixing the bows and the attachment points that are all rather worn out. Can anyone show me or explain. What makes up the vertical flange around the back corners of the interior opening. Mine is covered in material so I cant really tell whats in there...

Can anyone post photos of the inside of the header bow on a 35 roadster? The position of the metal brackets and also the amount of gap between the wood and the windshield frame. Mine appears to have been modified leaving a pretty big gap. What would normally seal off that gap if it is correct? I...

I'm looking for a pair of cast iron cylinder heads with an S in the part number I believe the 3 options are 81AS - 81SB - 99AS Thanks Zach

Does anyone know off hand if you can interchange Ford axle bells and axles onto a Lincoln banjo rearend of the hypoid type? My reasoning is for a sedan delivery that will tow a trailer, I'm wondering if the stronger center section would be beneficial along with the lower ratio if mixed with an...

Has anyone else run into suppliers selling undersized kingpins? I am working on a '36 Sedan that is getting '37 spindles and Lincoln Brakes. The Drake Kit that was brought to me "seemed" quality made... I put the bushings in and reamed them to the correct factory size the same as I have always...

Does anyone have any photos of drawings of the hardware originally used on the top mechanism on '35 & '36 roadsters? Mine just has random bolts/screws everywhere. I'm guessing they're some kind of shoulder bolt with a washer between the arms? Thanks for any help! Zach