Search results

1940 60hp connecting rod, NOS in original box with no rust on journals Have 7, just need 1 more.

I would like to know if the Thompson S975 valve is an intake or exhaust valve, or can be used in either location. Thompson catalog designation would be helpful.

Rock Auto has Timken carrier bearings for $23, and Timken double race for $30 Great price and service, with fast shipping.

I need a picture of a wide bed rear fender at the fender bracket location where it attaches to the bed. Both of my rear fenders are damaged in this location and have poor repairs. I can't tell if there is an offset in the fender mounting flange at this location or not. Also if the mounting hole...

I recall seeing some plans for a pickup bed canopy top in the past, but can't locate it. I believe this included working drawings for the brackets. I think I could cut the brackets on a water jet out of 16ga or 18ga steel and bend them. Here is a photo from the DeAngelis book " The Ford Model A...

I would like to make some seamed tank to carb fuel lines and am looking for some tips and techniques on the best way to go about this. I am thinking some sort of jig to hold an 1/8" sq. high speed steel lathe tool ground to cut a score in the tubing. Naturally I would use straight tubing, score...

I got this NOS meter in the box for $9 including postage. Hoyt was a Ford supplier and still in business today. All correct face, needle, nickel plating and design. Sure looks nice. Original at left for comparison.

I am getting ready to have some plating done, and will include some dash panels. What is the consensus on the grain direction of the butler nickel finish, vertical or horizontal, I have seen both. First photo was done recently by a plating shop in Ft. Worth and the graining is vertical and was...

test

Looking for information on the Sevrwell Junior Test Stand. I am about to restore mine. Frayed cloth wiring, undersized wiring, lamp cord on motor, no battery cables, etc. There is a past "Restorer" article on building a generator tester but I can't find it in the index. If anyone can tell me the...

Would like to know application of this mirror arm. I would like to use it on a 31 wide bed steel top pickup. Don't see a part number.

Finally found my cast iron 60 intake for the non believers. Has the draft tube mount as found on the late aluminum intakes. Don't see a part number. Now we have a use for all those fuel pump push rods. I will have to put it side by side with an aluminum intake. And for all those that think the...

What works the best for cleaning NOS dirty, oxidized engine bearings.

I have an NOS replacement 60hp block with factory thin wall sleeves. What type of rings work best running in the steel sleeves. Someone here had stated they require a certain ring type. I have Hastings #123, Ford 82A-6149A, and some Ford 82AS-6149A for cast steel pistons on hand. I have both...

I read here many months ago that the staging area on Wednesday would be no more. That all vendors would enter at 7am on Thursday with no staging area on the fairgrounds. I need the scoop, to determine to arrive Wednesday or Thursday. Meet was pretty much over by noon on Thursday. Like to here...

This is my NOS 60hp cast aluminum oil pan that fits the NOS replacement block that I have. That's a large journal rear bearing cap in the picture. Also note the breather hole in the pan rail. Ford lists a 1937 right and left oil pan gasket for an aluminum oil pan in the November 1950 Chassis...

I am looking for a large journal 1940 crankshaft for my NOS replacement block. Joe 214-876-1754

Still needing a 1940 60hp crankshaft for an NOS replacement block with large main line bore

test photo insert

Looking for 60hp large journal crank with mains that will make .030 or better.