Search results

my 1936 coupe project car was missing these two strange looking, dust/gravel shields? there is a left and right. here's my email, soundsmith76@gmail.com

looking for a right and left sun visors with all the metal parts, arms, plates, etc. everything that makes them complete, for my 5W coupe. let me know. here's my email too, soundsmith76@gmail.com

i'm at the very early stages of wiring my 36 coupe, after market 12 circuit fuse box. i'm hoping to find mounting in the upper driver side cowl side. there will be three groups of wires, 1 engine, front lights,horn, 2 dash gauges. 3 rear lights, fuel sender. it's more wires than these cars...

i'm looking for a picture of this sheet metal air scoop that bolts up to the bottom of the radiator on one end, and the lower grill on the other. my project didn't have one and i've never seen one. is it something i can make? any photos would help, thanks.

hello fordbarn folks, been busy with non ford stuff, but had a little time for something i care about, my 36 coupe. fenders have been done for a while, but i wanted to spray undercoating on the inside for rocks etc. all four are done, i used U-pol raptor liner kit. it works very well.about...

i'm finally fitting my seat in my 36 and i just don't fit. this is my first to be able to sit in it since i bought the project,2018 stock seat. stock column, 46 wheel. came with the project. with the seat all the way back, my guts on the wheel. has anyone re-located the seat tracts? the floor...

i'm looking for the pads that goes between the floor and frame along side the transmission, L&R, 5/16 to 3/8 thick, 1-1/2" wide. the picture is not my car, it's off the web, and looks like rubber, mine are broken and look to be made from horse hair? in the same pic, there looks to be a gasket...

does anybody out there have a drawing or photos of how this goes together? i'm missing the tack strips, so it's not lining up so good. i can only go so far with the mock-up. i have an ad in the wanted section, maybe they will turn up.

looking the two tack strips that go above the front windshield, i think the header panel also mounts to it.

i forgot about posting these pics like i said i would, sorry. i'll post right and left side and hopefully you'll be able to tell one side from the other. feel free to ask questions if you want.

i pulled my doors apart to prepare for bodywork, paint, and noticed the two regulator are not the same. maybe some learned person here can tell me what i have. the passenger side crank stud seems very well made with no play. the driver side works, but has a lot of slop in it. can i buy just...

heres a repair i had to do because of a really bad modification done way back when. seems like a torch and a hatchet were used for this mod. i'll just post pics and if you want to ask anything, please do.

i'm looking for the header panel that goes over the windsheild that the sun visors would mount too, for my coupe. call kurt at 626-571-4044 (land line) or email me , soundsmith76@gmail.com

i'm getting my coupe ready for paint, so i've been fixing all the things that can happen to a car of this age. i'll be posting some pics of the left and right lower cowl repair that are finally done later. the car had been up against the wall for months while i was working on the driver side...

36' door hinge bolts. where it bolts to the jamb, how are you guys getting that one bolt at the bottom. you know the one, do you cut a socket down? i drilled out the driver side, so it's out. but i started wondering if there was a trick to it. to be clear, it's the lower bolt that's all by...

i bought a pair of 1/4 window seals from cw moss. not real happy with them, when i removed the old glass the gaskets came off in bits & pieces and i noticed a small bead on the outside top edge. the new ones are missing this detail. any better ones out there? thanks, kurt.

yep, 36' header panel, like the one pictured, thanks. call kurt 626-571-4044 or my e-mail, soundsmith76@gmail.com

i'm going to replace the hardwood ribs on my 36' roof and have a couple of questions to ask you guys, what is the friction tape for , some sort of anti-squeak remedy? 2nd, each has a slot head screw a few inches in from the end of each rib, what is the reason for this screw? the screws go up...

i'm starting to reassemble my project car to see how things are going to line up and i've got a couple of questions. . . 1. brand new bob drake running boards, what goes between the frame and the running board? 2. where the headlight mounts, it's a kind or a stand that bolts to the frame...

i'm looking for this curved, ribbed brace that goes from the top of the rear window frame, to the top of the roof insert frame, see picture. mine was cut away, looking to replace it. call kurt 626-571-4044, or email at soundsmith76@gmail.com thanks.