Search results

Need a phone number for ken davis. thanks

My buddy Ken bought a V8 60 engine and ****** in Medford OR and needs to get to the Ventura CA area. No rush. If you know of someone.....Ken Walkey is a 300MPH Club member and builds his own cars. Thanks, Art

About a year ago or so, there were some posts discussing a seat belt design that turned a 2 point anchored seat belt into a shoulder belt design. I tucked the address of the maker away somewhere and I guess it's gone. Can anyone remember anything about the thread? Thanks, Art

I own 2 "A" that have hydraulic brakes. If any one is thinking about switching from mechanicals, PLEASE DON'T! I am looking for shoes that have woven linings for the 40(round hole) and for the 48 style with the "D" hole. I have been looking and calling but have not found a supplier and the...

I would like to put filters on my pair of 81's. Does anyone know the number or if they will clamp on OK?

I have 2 sets of backing plates that I need to find out about. one has just a cam adjuster and a fixed anchor while the other set has the cam plus adjustable anchors. What years are these and do they take different brake shoes? Thanks, Art

Does anyone know of a 33-34 Ford pick up bed available in the Pacific northwest? Thanks, Art

I just visited a fellow A owner and looked at his finished chassis and what the builder (Taylor in SoCal) about 8 years ago did was to route water from the rear of the block to the bottom of the radiator. How many of yo guys have made that mod? There was an article some years ago but I can't...

I want to find out if straight fan blades are noisier than curved fan blades. I need to buy a 14" cooling fan for my Model A and want it to be as quiet as possible.

I plan to run a 34 Ford V8 pump on my s/w sedan but can't figure how to attach a fan to it. Can someone give me an idea? Thanks, Art

I just bought a new in the box Ryan overdrive....without instructions. Are there any tricks or pitfalls to avoid when I try to install it? It has an AL 92 serial #.

Follow this link. http://i1.wp.com/www.retronaut.com/wp-content/uploads/2013/01/Fords.jpg

Be sure that there is a vapor barrier under the car if it will sit till spring. Dirt and concrete will rot out floor pans if some plastic is not spread under the car.

Does anyone know who makes or sells the part that lets you run a 32-34 V8 pump on a model A?

Looking for the cast aluminum adapter that lets you run an early V8 water pump on an A. Thanks, Art

I am running a 2301106 dizzy on my B engine and the nylon bushings that are the weight pivots are cracked and binding the weights so I get no advance. Does anyone know how to repair/replace these bushings?

My o/d hangs up when shifting forcing me to come to a halt then select the range I want. Either range works fine but I can't shift on the fly. Anyone else have this problem?

Looking for the 2013 Throttlers car show in Burbank Ca. I could not find it online. Thanks

I put '48 brakes on my '31 truck using a f 100 master cylinder. I can not get any type of pedal no matter how many times I bleed the system. I put a residual pressure in a few days ago but still no brakes. I replaced the master cylinder last week to no avail. I have the brake rod going into...

Want a F150 trans kit for my '31. Any one know of someone that sells kits? Art Bjornestad 805 379 2801