Search results

Who has part #s for points and condenser. So I might be able to buy them local. ( napa or oreillys ). Sent from my iPad using Tapatalk

Put in mid cam dual carb offy intake,2 94 carbs in my 59a engine. The carbs have 59 on the side of them i believe they are AA1. trying to get each set up one at a time, after a little bit of idling the engine shuts off like the key was turned off,got good spark thou.brand new ngk plugs are black...

Installed economy headers from speedway on my 48 ford all original,59A engine. Right side dumped out in front of the oval cut out in frame, left side did not, Does the wish bone arm from the center of the car to the front axle move much? Because that is where i want to run my exhaust...

Will the crab style replace the Y style cap that has the 8 plug wires jammed into the two holes? With out to much modification, 1948 ford with 59 engine,dont know the model of the dist. its stock two bolt. Thanks for any help.

59A engine 1948 Ford. Stone ground a 45 then marked the cut with a permanent marker in 4 places,ground with a 30 stone till I get where a want the lap mark. But when I lapped the valve I only removed one of the 4 marker marks which was the top of the valve seat. Did I not cut the 45 enough or am...

Is there a difference between 59a and 59ab. My heads r cast with 59ab. And should the pistons be domed or flat from the factory. Thanks for any help. Sent from my iPhone using Tapatalk

Hello new to the forum. Is there a kit out there to install a timing indicator on my flat head? Or do I make one? 1948 Ford Super Deluxe Coupe.With a 59a engine,have it apart so now would be a good time to go it. Thanks in advance.