Recent content by Zack

I'm trying to wire my 30 deluxe coupe and I have a couple of questions. I have a nu-rex cut-out and I'm not sure where the wires go. I have a wiring harness from Rhode Island but I'm confused as to what side do the 2 yellow wires from the light switch attach to? Bat or gen? What side of the...

Gary: yes thanks.....is that a grommet where the switch goes through the windshield?

Gary. Thanks for the picture. I have the correct windshield holes but I need to know what the hole on the inside looks like. Is it the same diameter as the windshield frame, or is it elongated to accommodate the windshield movement? Thanks

1930 deluxe coupe. Can someone post a picture of the correct size of the hole needed for the on/off vacuum wiper switch. I have to drill a hole through the metal header and I want to make sure I get it correct thanks

I have a two part question concerning my 1930 deluxe coupe 1). Looking through the Ford paint and body book it reads that the windshield color should be the upper body color? I’ve gone to the mafca website looking at original cars and I see windshields painted upper and lower colors. Can...

I'm in need of some help. I'm restoring a 1930 deluxe coupe and I can't decide on what color to have it painted. I did run across this picture and I like the way it looks. Can anyone tell me what colors are in the picture? I know its a base coat clear coat system. Thanks, Zack

Tom: Everything is powder coated. I spent many a weekends grinding on all the parts to smooth out all the surface rust. I didn't intend to powder coat everything, but one thing led to another and well you can guess from there.... Zack

Tom. Does this help?

I read a while ago that guys were reusing their old bearing because the repops where not holding up. Does anyone know if the usual venders have fixed and replaced their stock? Is this bearing pictured an original? How does one tell? My bearings look ok, but the cage is all scuffed up. Should I...

Tom: Yes. Can you tell me what the normal travel is for the actuating arm? I'll take apart the other side tomorrow and see if theres any difference. Maybe the roller tracks need to be worked better.

Perhaps someone can point me in the right direction. I just installed new brake pads in the front, had the roller tracks welded and new drums. I centered the brakes and reinstalled the drums. When I checked the actuating arm to make sure the brakes locked up I noticed that one side moves about...

Can someone tell me if this brake rod is supposed to be bent like this or should it be straight? Thanks

1930.. My car is June 1930 model. All my seat riser rivets are round except the ones I previously posted.

Dave: Took these this morning. I cleaned them up a little so you can get a better view.

Dave: Is this what your looking for? If not, let me know I can take more pictures. This is the front seat riser from my 1930 coupe. Zack