Recent content by wadeyboy

How did you fix the loose mountin bolts.? i have the same problem

how did you sort out the loose mounting bolts? , i have that problem

did the 29 model A Tudor tudor come out with round rubber pedal pads for the brake and clutch pedals? Just curious as my ones need replacing and the pads have 2holes trough each to screw into metal pedal

Only a Junior here however i have just got my 29 Tudor running after sitting in shed for some ten years or so. i refitted my marvel as well. However when i started her she was running real rich. I have since found out I had two minor problems the choke control lever was coming out of the GAV...

hope all the solutions here help me solve a similar problem .at least i know have some possible solutions.thanks all

old31 , thanks for that, I have it out of car, will look at that tomorrow. i guess you can see my response to Wick above( i could of replied to you both in same post now i realize) Anyway also thanks , and i will let you both know how I get on

not sure if it was right thing to do but last time it was out i put float into a bucket of water pushed it down and rotated it around. No sign of bubbles. This should Do the trick for holes in float? I have carb out of car, i actually left fuel on last night and had fuel in tray under car this...

I have a problem when fuel tap is on carb does not leak but as soon as I try to start it I have fuel pulsing out the float bowl vent hole. It never use to do this when been used 10 years ago when I was regularly using it I have checked float as thought needle might be sticking , replaced gasket...

its great to know what carb i have on my tudor it has been off road for a few years and i did clean and inspect carb recently today when i tried starting i had fuel squirting out the float vent hole.I wonder did i hod choke out to long? or do I have anorther problem? suggestions please

well just what i needed and finally identified my carburettor.