Recent content by tomwhi

take the dashpot off and throw it away

gunk hyda-seal 5 gallon bucket

good way to suck unburned gas etc. back into motor. whey dont you ring pistons and be done with it

what about using autolite 216 plugs in 100 hp ?

what weight oil are you running?

starter spins fine when cold but drags when hot. any ideas?

what is the ball park value for putty filled but presentable original drivetrain car?

how big a deal is a rotton front crossmember to fix and if driving car will it hurt it?

rear- has no packing nut and has grease fitting front-has an oil cup on top no grease fitting. thanks

i put my sector bushings in my 7 tooth and did not have to ream. if steering shaft bearings are good get a new sector. worm gear probably is ok.

loosen U clamps on rear and tap spring about 1/4 inch to the side that is lower. then tighten clamps up and check with tape again.

when did Garfield go out of business? have a set of 4.40/4.50 21 need one tire anybody know how to decode the stamping on the tires as to when the tires were made?

anybody used M&S shocks? they make a new shock at a good price.

its not the release bearing because when you let the clutch out it stops spinning. probably spring out of disc. start tearing it down!:)

are rebuilt shocks worth the money? any body know where you can find a set? hit a pot hole couple of days ago and decided i need them!