Recent content by tdemo43

  1. T

    crab dist. v8

    Was removed and Mallory was installed, no real change in performance. Spent @$340 for Mallory would'nt do it again. works as is, $20.00 shipping insurance included, to lower 48
  2. T

    Y- block 4bbl. intake part #ECZ-9425-B

    Comes with thermostat housing and Idaho dirt. NOT PAINTED!! Sold as is!! $150.00 plus shipping. No broken studs or stripped threads. Clean and use. M, O. Pay Pal, or Cashiers check accepted. After 3 days will be listed on E-bay.
  3. T

    Wanted: 8ba Starter plate & starter (Flathead)

    I do have several plates and good starters. You need to tell me which bellhousing you have. Most of the flywheels have the same number of teeth, but count just to be safe. Plate and starter $50 plus shipping from 83401 call 208-524-3995 with questions
  4. T

    Wanted: Good 8BA block

    I have one I pulled the heads to check for cracks, none found, can disassemble and have magged if you are interested. call 208-524-3995
  5. T

    y-block parts

    Edelbrock valve covers, no cracks or repairs, aluminum finned, not polished yet. ECZ-G cylinder heads, magged. complete with valves, springs, retainers. 1957 4bbl. intake, big holley bolt pattern, no cracks or repairs, clean, paint then run. One 292 short block, turns, but needs rebuilt. One...
  6. T

    falcon t-10 4-speed trans

    Borg warner t-10 for falcon, ranchero, comet, 62-65 bench seat. I had originally planned to use this ****** behind a flatty in a "32" roadster becase the shifter location is up close to the main case. It puts the shifter farther forward than any other 4-speed ****** I have seen. The end result...
  7. T

    59ab flathead core engine

    I have a 59-ab that is complete. Pulled from a truck and stored. If you are interested I can send you pics. call me at 208 524-3995 Tom I live in Idaho.
  8. T

    Wanted: 59AB flywheel 10 inch

    I have a flywheel for you if you still need one. Tom 208-524-3995
  9. T

    Project cleanup

    hey, I'm in Idaho Falls and I could use a 3-speed ****** case. can I see pics of yours??
  10. T

    Wanted 16 Spline driveshaft yoke for T-85 OD

    I do have am driveshaft out of a 56 merc with the t-85 trans phone me if you still need the yoke. 208-524-3995
  11. T

    Need transmission

    Rags, I do have the correct bellhousing that will mate the t-85 borg-warner 3-speed o/d ford trans to your 50 8ba flatty. I have several o/d trannys for sale, but only one bellhousing. The starter plate must match the bellhousing, I also have it with the bellhousing. Are you aware of the wiring...
See more
Back
Top