Recent content by steve hackel

I can send pictures to your cell phone but can't figure out how to post them here

A nice pair of 34 - 5 window coupe regulators. Cleaned and etch primered , the 4 glass channel rollers will need to be replaced.

Price drop to 1,000

Price drop to 500 - someone should be able to use this one ? Thanks

32 - 34 B' block in nice condition, sleeved back to standard on all 4 cylinders, standard pistons and B' rods. Block was machined for insert bearings, and all sets of bearings are there - but I don't know what size they are ??? :eek: The crank shaft that this was done for was removed from this...

btt I also have another B block that was fitted for inserts, rods & pistons another counter balanced crank - but not the original one from this block $600

I have a nicev34 B' engine and trans that was removed from a running car imported from Argentina, and the owner wanted to make it aV8 hotrod. Acquired this for my lifelong friend Dave, but unfortunately he died and we never got to build his dream A' coupe. Can't figure out how to post...

Somewhat related ..... when running well, how many CFM would these put out and at what overall PSI ? Could one of these run a sand blaster for doing frames and other heavy items - outside? Thanks

Most issues are not specific enough to address them with just a simple, short and easy answer. If it's only the "ingress & egress" of the drivers side entry, then you have to live with the only 2 choices available - drivers side or passengers side doors. If you are referring to more room...

Every states policy is different, but the amount of stupidity is across the board no matter what state you are in. I bought my 1931 "COUPE" several years ago, and at the time I was forward thinking enough to make a photo copy of the original title that had come out of Texas. MY photo copy...

Interested in finding a good condition 1932 bumper ( or 2 of them ) for my 1933 pick up truck project. I like the looks of the 32 bumper rather than the 1933-34 styles. Thanks, Steve

Looking for a 32-34 pick up cabs roof section, or just a front /rear section of anything that might not be rebuildable ? Thanks, Steve

I've heard that before and will check the through holes in the morning. I was wondering if that pressure plate and clutch assembly were correct, or would they even work in my application? Still asking....

I have a rebuilt 8ba motor from Dennis FRings and an empty flywheel that I believe is correct, but he did not supply one with the motor. Would this be the correct clutch & pressure plate I need for the setup? It does appear that it's correct from the pictures, and the pressure plate has...

Once I have the flywheel cut down and balanced, would this be the correct clutch & pressure plate I need for the modified setup? It does appear that it's correct from the pictures, and the pressure plate has the exposed counter weights. Would this also be correct for an 8ba flywheel...