Recent content by socalsmith

I recently developed a nasty squeak/squak in my left front suspension really annoying. The car has all new components. Was wondering if anyone has had a similar experience and can provide information on what to look for and how to solve the problem?

I'm wondering if I enlarge the tank vent to 3/4", the same size as the vent receiver hose on the jeep filler, if this would allow the gas input to enter more freely. Your thoughts ... thanks socalsmith

With the fuel filler nozzles of today, am looking for ideas on modifying the nozzle receiver so the pressure is relieved when filling the tank on my 61 Ranchero. I'm currently looking at a Jeep CJ receiver. Has anyone tried modifying the fuel input on the early Ranchero and wagons? Any input...

Have 1935-7 rear window frame and good glass for sale.

1935 - 37 pickup rear window frame with glass for sale - $100

A few years back I installed a Halogen headlight kit in my 37 pu using stock lenses. Never was satisfied. Low beam just ok. Hi beam, no beam just a flood light. I've been told, that changing the bulb to an LED may provide a beam for both high and low beam. Anyone had this problem and if so...

Does anyone know if the heater box can be spit and a new core installed without removing the entire heater box blower motor and all? I have a v8 with "hang on air" and I didn't want to remove the whole setup just to replace the heater core. Any info is appreciated Thanks ... H. Smith

Need hood springs for a 63 Falcon. Anyone know where these are available or what can be used as a replacement? Appreciate any ideas...Thanks

Anyone know of a source for an equivalent (size/tension) hood springs for 63 falcon? Replacements stock springs are not available. Appreciate any info. Thanks H. Smith

Need hood hinge springs for a 1963 Falcon

Need a straight 1960 - early 61 Falcon lower control arm for suspension. Any help is appreciated. H. Smith

1965 Ranchero (1964 grill) -- $1700 • 5 lug rear axle • C4 trans • Good sheet metal & trim • Good interior • Have front disc brake kit - 4 lug • Have title • 6 cyl & 8 cyl bell housing • Engine, brake and steering components No motor Has bent right front sub rail (can be straightened) Restore...

Thanks for the tip. Fortyfords had the bracket I need... Thanks again SoCalSmith

I'm in need of a left front inner bumper bracket. During assembly I found the correct one missing. Thanks socalsmith

Anyone know where I may find a inner left front bumper bracket for my 1937 sedan. Am in the process o finishing assembly and discovered the one arm missing. Any help would be appreciated. Thanks socalsmith