Recent content by Rolandwood

Re: ‘29 Briggs Fordor 60C visor removal Thanks for the pics, Terry. That is a beautiful restoration. I hope mine turns out nice but I don’t think I can get quite that nice! Sure is fun messing with the 60C though.

Re: ‘29 Briggs Fordor 60C visor removal Hi Terry, mine is a 60C blind back, steel back. It was parked in 1963 and other than dry-rotted wood it was complete and original. My biggest problem with the wood is the long rails in the floor. One is only half there and the other is in rough shape. I...

‘29 Briggs Fordor 60C visor removal I’m installing all new wood in my ‘29 Briggs 60C Fordor steel back and I would like to remove the visor. It appears to be leaded onto the windshield posts. Is it also welded? This is an interesting project. Thankfully most of the original wood is good enough...

‘29 Briggs floor rail pattern I’m in need of a pattern, tracing, whatever you might have of the long side rails for the floor of a ‘29 Briggs two window 60C Fordor. I particularly need a pattern from the B pillar forward. I have usable patterns for the cross pieces and rear seat riser, just...

Re: ‘29 Briggs visor removal, I’m stuck! Oops, my mistake the visor is only leaded to the a-pillars, not welded too. I still think I’ll try to replace the wood with the visor in place…maybe.

Re: ‘29 Briggs visor removal, I’m stuck! Thanks for the input. I discovered four wood screws holding the header cover in place that were hidden under the residue of the weatherstrip tape Ford put on the cover. The screws go through the header cover, the steel frame joining the a-pillars and...

‘29 Briggs visor removal, I’m stuck! I’m trying to figure out how to remove the visor (if possible) and the header panel/windshield mount on my ‘29 Briggs 60C (blind steel back Fordor). I have the windshield frame removed, all the nails for the filler panel above the windshield removed, screws...

Could a person use water in the setup? Same buoyancy as gasoline?

My ‘29 Briggs 60C has painted non-stainless cowl,lights. A bit more cone-shaped but the stands look the same.

Re: Interior window trim for ‘29 Briggs 60-C Thanks, I’ll give him a jingle.

Interior window trim for ‘29 Briggs 60-C I’m trying to find the interior window trim (passenger’s side/front door) for my ‘29 Briggs 60-C steel back two-window sedan. The trim measures 24-3/4” long by 15” tall. Any help would be most appreciated. Thank you!