Recent content by reddog565

Any dist. Wrench bent 90. I believe it's 9/16.

I've tried them all, there is no magic fix in a bottle! The only way to stop an oil leak is to install new seal. Drive your car as much as you can and enjoy it.

Hi guys! We've all been around a long time, we've been through many ordeals.I'm just saying I hope everyone stays safe and survives this. as I know we will. I don't know if this is going to offend anybody ,but God bless us all!

Time to take a break from hot rods! Selling 51 Ford F100 rat rod. Professional Build, top quality components. Chopped Channeled.Rebuilt Y block. 3- dueces. New turbo 350. Lokar high shifter. Ford 8.5" rear end. There's too much to Write! Car goes straight down the road No issues! This car is not...

Initial timing is 12 degrees. Total timing is 38 degrees

Hi guys! Latest update on trying to find a vacuum leak. I made a smoke machine. This is what I came up with. I taped the center carburetor off, So no smoke would escape. I connected the smoke machine to the port on my manifold. I found smoke coming out of the center carburetor top hat. That's a...

I have a " stock rebuilt, with trips". It has an electric fan. So, I run a 160 degree thermostat..

When I changed jet's to #54. It didn't Help. All it did was make the plugs Turn black. Any thoughts on a home Made smoke machine? I don't know Of anybody around here that messes With old cars like me.

Love your chopped top!! The center carb. ECG.(good one). Both outers- model # 59

Nice fuel squirt! When I posted this Last time, the "issue of sucking air" On outboard carbs was brought up. So, that's when I sent them to Vero Beach. They were reworked to make Sure throttle plates are completely Closed! Correct me if I'm wrong, but When I close choke some, I'm in effect...

Great input guys! It's progressive linkage. And the"problem" is only upon initial accelerate ion. I "inherited" this "issue", when I purchased car. It's annoying, because I have to constantly adjust Choke..

Tried #54 in the ctr. Pulled plugs, they Were black. Way to rich.

Forgot to mention jet size. Ctr#52. Outers# 50. As for ctr. Carb.I Rebuilt it.

Hi guys! I know I posted this before, but I'm back to having some issues with my trip set up.the issue I've been having all along is I have to run with the choke about halfway closed. My center carb has a manual choke with a power valve. The two outer ones are just there to supply fuel! No power...

Just my two cents? I like most of you other guys on here I'm a senior. But, I've learned you have to keep up with modern technology. I realize most guys aren't comfortable with cell phones. But you're dead in the water nowadays if you don't have one. They're not just for talkin there for taking...