Recent content by Ramrod2624

Yachtsman, are you talking about the entire unit or just the outer tube? I agree that finding it locally is the best bet

If replacing it where would I find a replacement ? Yes this a 26, and yes the crack is on the top of the column. It's pretty bad and current cannot be driven las is. Thanks

Los Angeles / orange county calif. it looks like light gauge metal, I. Guessing tig welding, this is more of a cosmetic tube correct?

My first model T , I just got it running it had a crack on the steering column tube at the top. When turning the wheel it is cracking more and will not fully turn right. Can this be fixed, or do I need to replace the tube? If so where can I get one? Thanks

Thanks, I ended up picking some up about two weeks ago

Thank you! That was what I was looking for.

Where can I find a reference that will tell me what year T I have? I found the vin number stamped on the passenger side frame rail. Now need to see if I can match numbers to year. I did a quick search and didn't find anything on the site. Thanks for helping a newbie

Really? Cause I have all the eggs I can get! Fresh from the hens out back! Does that really work?

Ok so I figured it out today! It looks like the roller on the timer was sticking and not hitting properly, made a few adjustments and she fired off! Problem now is I am seeing a bit of water leaking from the back of the head by the fire wall. Guess I should change the head gasket anything else...

Looking for a good set of 4 tires 21 x 4.50

Here's what I found today.first I didn't realize I need the coils to buzz when the switch is on. Checked power and have voltage to the bottom of the coil, then I checked the commutator and shorted each one to ground and got spark. But I was not getting the coils to buzz. I cranked the motor over...

Hi im new to Model T's but have been lurking around here for awhile learning. Im trying to start my motor afterinstaling it. I know it runs becuase I had it test run on a stand. I have new wiring, rebuilt coils from the coilman, new comutator,rebuilt the carb (altough I hope I did it right) I...