Recent content by pcup

Here in co. They have emissions testing business's that also verify vin for a small fee.[$20] that's what i did 2 months ago, as they [dmv] wouldn't accept the existing titles from ca.good luck, pcup

The clearance between top of rear end center to underside of rear spring on my 30 Tudor is approx 5 1/2 inches. As the other commenters have suggested I would focus on the rear end assy. Spring [how many leafs], condition of them, and shackles! The EXHAUST CLAMP should not be tight! It must...

Here,s from #2 D. P., What amount of CC's in the combustion chamber = 6:1, 6.5:1 ? Thanks, pcup

BRENT, I'M NOT ABLE TO BRING PRIOR COMENTS BY CARL G, WHO ARE U REFERING TO AS [BILL] AND WHICH HEAD. I'M IN So Cal JUST RETURNED FROM COLORADO AND THE "C" HEAD JUST DIDN'T CUT IT AFTER 6 K ELEVATION. I WILL MOVE THERE SHORTLY SO I ALSO WILL NEED ANOTHER HEAD. PCUP

I modified the stock adjustable assy. for my comfort, bad back! To the floor mounted steel slider guides I added tapered wood spacer blocks. 2 wood blocks 16" x 2" - tapered to 2" - 3/8" 1 wood block [front] for L bracket tapered 2 1/4" - 1 1/2"...

this a.m. Was the 1st i've heard it. The temp. Was about 70 and the pickup was used the week before. It's not a high time eng.

When starting the engine a slapping noise [like a leather belt hitting the wall ] came from the front. I pulled the fan belt, restarted and same noise! Suggestions readily accepted.

Any luck finding the fender?

I NEED TO IDENTIFY THIS STEERING BOX. WHAT DID IT FIT? CASTING #s 1102464 63A 72

Pictures forwarded. Gene Reinhardt

BLOCK HAS "SNAP IN" BEARINGS AND BUSHINGS FOR CAMSHAFT. BLOCK WAS Std. BORE NO RIDGE, CRANKSHAFT WAS Std. ALSO INCLUDES: 8 CON RODS, CAM,BEARING CAPS, Mtr. MOUNTS, FRONT & CAM COVERS, FLYWHEEL, BOTH Exh. MANIFOLDS,PAN / DIPSTICK, BOTH HEADS...

BLOCK HAS "SNAP IN" BEARINGS AND BUSHINGS FOR CAMSHAFT. BLOCK WAS Std. BORE NO RIDGE, CRANKSHAFT WAS Std. ALSO INCLUDES: 8 CON RODS, CAM,BEARING CAPS, Mtr. MOUNTS, FRONT & CAM COVERS, FLYWHEEL, BOTH Exh. MANIFOLDS,PAN / DIPSTICK, BOTH HEADS...

on my 30 tudor [unrestored orig] they meas. 1 7/8" high X 1 1/2 wide, length is just over the rear cross member.

No one mentioned stopping improvement! I have the Firestone's 16" and they handle much better than 19".

Hi Jr. The speed O meter quit. At 29 miles I reset the TRIP and hasn't worked since !! Any suggestions as I haven't removed it from dash. Yes the SPEED WORKS BUT IS QUITE SLOW. GENE REINHARDT 626 - 287 - 1044