Recent content by novaskilling

Have a closed drive 39 style trans that I fully rebuilt all new bearings new synchros new detents etc. been driving it a year now and lately it’s giving me some issue. Sometimes when I go to shift into second from first it’s like I hit a wall and can’t get into second. If I release the clutch...

I just installed a new wood header in my 30 tudor. I put the metal header cap on and am getting ready to install the windshield frame. I noticed though the the holes in the header cap don't fully cover the wood header or that the wood header isn't long enough. is this a common issue? Do you...

I’m looking for the drivers side curved roof panel for a 30/31 model A Tudor. Also looking for complete door hinges. Thanks, Chris.

message sent.

I’m looking for 40 ford style brake drums and hubs.

I’m looking at a set of edelbrock 1116 high lift 8BA heads and was wondering is it necessary to buy the $700 head stud kit they recommend or can I use stock head bolts or even grade 8 bolts?

I’m looking for a 1930 Tudor passenger side subrail, thanks.

Im looking for passenger side door hinges for my 30/31 tudor. I really need the cowl side of the hinge but will take complete sets. Thanks Chris

Thank you I’ll try that. I am tending to agree with you. All this started when my new efire broke the rotor after break in.

No it’s the new e-fire 8BA by stromberg

Hey everyone I could use some wisdom here. I have an 8BA with an isky 400jr cam, thickstun pm7 intake and two fully rebuilt stromberg 97’s and the new stromberg e fire 8BA distributor set to 10° timing. Plugs are b-6 jets are 43’s with 67 power valves at 3000ft elevation. Not running progressive...

I’m looking for a good pair of rear brake drums for my 40 ford banjo. Must be like speedway and boling bros sells that slide over the factory hub.

I’m looking for a 1935 ford wishbone cup cap. I have one half but missing the other. Would buy a complete cup If need be. Thanks chris

I’m looking for an original adjustable filt-o-reg fuel pressure regulator

The kit I got from rockauto is MU73461B I do have a 39 style hub with a new bearing and spring on the trans so I’ll certainly use that! I appreciate the advice that new bearing and hub threw me for a loop, everything else in the kit looks correct and nice.