Recent content by kevinwalshe

Hey guys, I'm trying to find a McCulloch supercharger setup for my 8BA flathead. Let me know what you have. I have cash in hand. Thanks in advance, Kevin

Got one. Thanks guys. Please delete.

Searching for a spoon pedal assembly with cups, mounting hardware, etc. Currently putting an 8BA in my Model A. Let me know what you have. Cash in hand. Pics are appreciated. Thanks guys, Kevin

Sold. Please delete ad.

Looking for one of the plastic/poly mock up flatheads. If you have one, or know of anyone selling one, please send me a message. Thanks in advance. Kevin

I could have used this posting a couple weeks ago when I replaced mine. My gear was not marked correctly as the "dimple" was for the timing pin, not the gear alignment with the crank gear. Set it to TDC, and then insert the gear making sure your timing pin lines up with both valves closed and...

Yes, it had the aluminum center piece but it broke when I was removing it. I then used a gear puller to get the aluminum off of the cam. I have email Dan McEachern and a currently waiting a response. I've never replace a crankshaft gear and don't want to get in over my head with it. I don't...

You want your motor to get up to operating temp, then let it cool completely overnight. Then before you fire it up, torque each of the bolts in sequence. It took me 6 times before the head would hold torque. I occasionally check them and they will still need a little tightening from time to...

My fiber can gear grenaded yesterday and I need to find an aluminum one ASAP. I am not interested in another fiber one as I don't want to have to replace it ever again. Please let me know who sells them and I'll happily sent them some money. Just the cam gear, not the set. I've attached a...

Trying to utilize what I have since it's a brand new seat. Trying not to spend any money if I can avoid it.

Hi Guys, I tried a search for lowering the front seat springs but could not find my answer. The problem I am having is that I do not weigh enough (apparently) to compress the seat springs and I'm looking at the header panel. I have already modified the riser and pretty much have the rear of...

It did not specify. He said it works so good the back of his transmission is starting to rust. Neither answered the question.

What is the "dam" made out of on the rear seal? Any help would be appreciated as mine is leaking quite bad at the rear seal (closest to the u-joint). Kevin

eBay prices are a joke now. A few years ago you could buy stuff for what you would find it at a swap meet, now those jokers think it is made of gold. I try to avoid it and buy parts from fellow 'barners or at local swaps. This is the best place to find what you are looking for, quite honestly.

Price dropped to $100 obo.