Recent content by havasudeuce

check out our latest video about the HavasuDeuces show. Lots of 32's WE had 187 our first show and expect more this year. https://youtu.be/5f3Bzqeube8

Hey guys, there is a search function that will allow you to view the cars by body style. When you are on the registry, select 'body' and then enter '3 window' or '5 window' for example. Just today we got cars from Norway, Belgium, and Switzerland. Also, there will be a stats page that will...

Thanks for the input guys. We will add a column that will ask , original or reproduction. The site is just in the startup mode and we will be adding a lot of features. Every two weeks we will pick at random a feature car from the site. So we will need pictures and a write up for your car when...

The site is set up to register all 1932 Fords. They can be reproductions.

A new website has been produced for all you 32 owners. It is the 1932fordregistry.com We are attempting to register all the 1932 Fords in the world. It's just a start, but it will grow into an information center for all 32 owners. It will list events, clubs,and...

No, I just bolted on the W&W heads. The only thing I did was to coat the combustion chamber, pistons, valves with a ceramic coating. When testing the coating on the dyno with a test engine, the EGT's went up after coating. Result of throwing more of the heat out of the cylinder. I drive this...

Hi Ron Here is the combustion chamber design I was going to copy. It is from a Jr Dragster that was a winner i like the radius around the valves. Should work good. ( it did win!!!) Dick

Hi Ron Been a while. I am getting 19 to 20 on the hiway. I could do better with a higher gear. I would like to replace the C4 with a 4 speed but it could get tight. Still looking. The engine has 304 ft lbs at 2700. I could drop another 30% and still go down the road easily . I do run a...

They don't make a simple one as far as I know. I only use a small portion of what the ECU can do. Unless you have someone that is familiar with mapping and harness's ,,, lay low

I understand I had a Riley 2 port on a "C" block.

The ecu is a Emtron from Australia. I was lucky enough that the designer and owner of Emtron was in Havasu when my engine was on the dyno. He used it as a mule to do some teaching on mapping. It uses knock sensors to control timing. 2 and 3 don't like each other and ecu identifies which one is...

go to full screen and turn the sound up.

I think you were thing of Relics and rods. Their show is in October and it is a good one.

115 and up, I leave the roadster in the garage. The older I get the lower it gets. Dick

Is is a sound track of a P51 Merlin