Recent content by grego31

Bump to the top. Make me an offer.

I have two rear ends from my 1950 Sedan. Both are the 4:10 gears for v8 cars with over drive. One is ready to go, all rebuilt with new brake shoes, wheel cylinders and surfaced drums and new seals. he other one is apart and would need to be rebuilt and reconditioned. I would like to get $150 for...

I have two rear ends from my 1950 Sedan. Both are the 4:10 gears for v8 cars with over drive. One is ready to go, all rebuilt with new brake shoes, wheel cylinders and surfaced drums and new seals. The other one is apart and would need to be rebuilt and reconditioned. I would like to get $150...

Is the pedal stuck in the down position or stuck on the floor? Open the bleeders and see if the brake system is stuck under pressure. If not, you will have to try and loosen the adjusters at the bottom to loosen off the shoes.

Can anyone give me pointers as to what cars I can find this carb on? I can check the pick and pull locally or fleabay if needed. And will this carb work on an Edelbrock manifold? I have a stock 8ba backed up with a c4. *edit* I looked on the eekbay site and found a bunch but don't know what...

What adapter kit did you use?

I could be mistaken but I am pretty sure that you can't mix fluid type. Using the silicone fluid or dot 5 causes the rubber to swell or shrink. That could also be why the brake switch stays on. You need to start from scratch and replace and/or rebuild all components including rubber hoses and...