Recent content by Ford guy 2

Hello I am looking for a pair of inside sun visors or what ever you have for a 31 slant windshield Thanks Pete

Hello, I am going to do a brake repair on the car and have been thinking should I put in woven linings or molded linings, is one better than the other in stopping distance what do you think, Thank you for your help

My car is a 31 slantwindow

Can someone tell me how to adjust the break light switch,mine if you just put your foot on the pedal the brake light comes on with no pressure what do I do.Thanks

I just would like thank all of you for the great help that you have given me,I put shims under the cowl about a little over a 1/8 of shims and the hood is right in the middle of the latch ,now the hood is even all the way around the cowl looks great, Thanks Pete

The hood needs to move to the rear of the car, I am putting some shims on the cowl to see if that will help,Thanks Pete

Yes it did have some shims under the front, I will try doing that today and see if that works. Thanks

Yes looking at the bottom side of the hood the gap is bigger, I have no shims on the cowl and the doors line up ok

Yes I did a frame off restoration and before I did the hood was in alignment

Here is a pic of the hood

I Will try to post them, Thanks

Sure need help with this one, my hood is off of alignment with the hood latch all four of them, the hood needs to move to the rear of the car and there is no room to move it because the rear hinge on the fire wall can not go back,The car is 31 four door slant window 166B . What do I do. Your...

Need help for rear wood arm rests for my 31 slant window 160B or a sketch to make them any help would be Appreciated, Thanks Pete

Hi can someone tell me what size thread the nut is for my vacuem wiper for my slant window i need to chase the threads, Thanks

Hello can someone please tell me when did ford start putting the little bump in the inside of the rear fender. i have a 31 slant winshield mine was made in february of 31 i just want to know which ones to use i have both with the bump and without. as always thankyou so much for your help Pete