Recent content by Ford Freak

Oh yeah, good info Rotowrenmch! Thanks form refreshing my memory!! F F

Hmmm..... maybe my memory has stabilized.:)

Yeah, I believe my engine builder did something on one of my hotter 351C's to improve oiling. I think he put restrictors in the top end to keep more oil in the bottom end. Sound right? Not 100% sure, as my memory gets worse by the month! F F

rotorwrench - I didn't know you could get a new 351C block. Good to know. Thanks! F f

I dropped a Manley valve in one of my 351's years ago, and had to sleave a cylinder. It was a 1970 block, which according to some had the highest nickel content. So, we saved it. Back in the late '60's "Ohio George" Montgomery used C6's when he ran his Ford AA/G gasser Mustangs. The blue car had...

Kultulz - Very interesting information. Thanks! F F

My'56 came with a !957 9" in it. One of the few good things the former owner(s) did right! '57 is the only 9" that has the round back. Street rodder's love 'em. Very hard to find these days. The '57, '58, & '59 are the same width as the original rear's that came in '55/'56 passenger cars. The...

KULTULZ - Yes, I had read that the early TB's had same problem. Thanks for the link! rotorwrench - The car came to me w/a slightly bigger cam, & Edelbrock 4v manifold. It also had a 750 Holley (way too big!) & a Mallory distributor w/no vacuum advance. I put a new Holley 600 on & a new...

That crossmember that the ex. pipes go through is quite thin steel. When i finish w/my removable center piece it will actually be stronger, as I will be using 3/16th's steel plates to bolt it back in. My ****** is ok now, but I am always thinking/planning ahead & prepping for the future. (I got...

New news to me....thanks!

It's really neither one. Just an "old school" hot rod w/a few upgrades. Something you probably would have seen in a high school parking lot in the mid sixties.

KULTULZ, I have been over p. 125 many times. Like I said in my original post, There is no mention of the 2 spd. Fordomatic trans. removal. Only the 3 spd. manual & overdrive trans. rotowrench, It's a 351C 2V engine & c4 out of a 72 Mustang. Was in it when I got the car. There is nothing wrong...

Hey guys! What's involved in removing the auto trans on a '55-'56 Fairlane. My car has a 351C & c4 auto. I don't see how the trans. will clear the rear frame crossmember. I am not talking about the rear trans. mount. That piece comes out fine. I am talking about the crossmember that the parking...

Yep, sure do! Btw- Likke your 58 Custom 300! Every old car has a story, so tell me it's history, if you don't mind.