Recent content by flatoz

I'm asking for a friend of mine, he has a good 3.78 crown wheel out of a 1948 rear and wants to put it in his 4.11 1936 rear. Has anyone done this? things seem to measure up and he thinks that the narrower bearing will go on the crown wheel side , swapping out the 1948 wider bearing. I've...

Does anyone have a photo of the spacer #68-3598 I've looked at exploded views of steering setups and cant see it, also google doesnt bring anything up. Wishing to purchase this as per the 32 books recommendation to improve steering. Andy, I will check the front end , but the spindles were fitted...

Thanks David, I will take some photos but I did rotate the column towards the floor, however the box was hitting the block before the sector shaft was clear of the chassis. I really don't want to have to pull the motor and trans to get it out. I'm planning on doing the 15:1 modification to the...

I'm pretty sure I know the answer, but will ask anyway. I want to remove my steering box from the car and was hoping to do so without removing the engine. I looking and looked but I can't see how I can do so. It looks like the sector shaft won't allow the box to clear the chassis before the...

I'm still chasing one of these if anyone has one.

chasing a Model A or early 32 rear end cross that the spider gears go on. thanks.

Hello, I'm chasing a good Model A early 32 rear end cross that the spider gears go on. location not an issue, quality is though. thanks

Again, Thank's Bill. That will help me immensely. I really want this car back on the road in the next few weeks. And this is one of the jobs that stands in the way.

Thanks Bill, In your post you gave the link to the thread on, you mention the angle of the hole in the shaft as 55 degree's I take it you measured this off the last photo? Also am I reading it right that the angle of the spoon pedal arm is about 66-7 degrees? thanks.

Hello All, I'm a long time FordBarn user especially the old one, but mostly read now or look in the classifieds. I have been chasing a 32 V8 gas pedal assembly and haven't had any luck. Well last night I was looking at the B model one I have and feel I can shorten it to make it work. However I...