Recent content by ezloader

Positive to positive etc yup, Tried it on my other car seems fine!.

Hi all Car sat for awhile battery was 4.0 volts. Put on charger for an hour now it’s 2.0 volts. What has happened??😳 Daryl

Thanks for the info guys, I’m guessing I have to bend the one end in order to fit Just have to make sure the holes in the cowl for light mounting will be in the right place! Cheers Daryl

Hello all Trying to add cowl lamps to 29 standard phaeton, got the correct brackets but they dont easily fit are the inside cowl panel measurements the same on 29 and 30 31??. Wanting for turn signals, holes in brackets are 1/2" out compared to tank clamp holes . Appreciate any suggestions...

Hi all My 29 phaeton never had cowl brackets Got some and the holes are 1/2 inch out for tank clamps Wondering if I have to redrill or something else,wanted to use for turn signals.. As always Thanks in advance for your help. Daryl

Thanks guys They mount an inch down from the tank bottom so I’d be OK. Didn’t see the tank clamps in Andrew’s picture so just wondered if the bracket actually goes between the actual clamps themselves. Cheers (29 Phaeton)

Hi All Wondering if the cowl light brackets go u In between gas tank clamp or other. Thanks in advance DJ

That would be great Rusty! You always have the answers. Much appreciated Daryl

Got new bows from cubél They are marked 1 2 3 4. Is #4 the rearmost one and #1 the front one? Put the irons all together and they are quite a bit to wide to mount to the studs. Something’s up maybe I have to shorten the bows. Thanks in advance for any info. Cheers Daryl

Hi all Anyone came across a video for top install Video? I’ve found roadster ones but would be great to have a correct one. Cheers . TKS in advance for any wisdom. Daryl

Sorry pic won’t post Stainless about 1 1/2 round with hole in the middle

These came with the lights Great info from y’all much appreciated What are these for?

I know the 29 phaeton wasn’t born with these lights, Came across some and would like to use as signal lights Think I might be missing things ,have 2 round silver dollar type pieces Do they go on the inside not sure if 29 use the wood blocks or not.and what is used as washer on the outside if...

Hi all Have one rear brake that’s a little off won’t lock on # 3 position on pedal.If I make it lock then release pedal It does not spin freely until I back it off a few clicks. Lining is good maybe wacky brake drum? Tried all lengths on brake rod no luck. Thx in advance 29 standard phaeton. DJ.